applications/staticProps/RNEMDStats.cpp

/*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 *
 * SUPPORT OPEN SCIENCE!  If you use OpenMD or its source code in your
 * research, please cite the appropriate papers when you publish your
 * work.  Good starting points are:
 *                                                                      
 * [1]  Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).             
 * [2]  Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).          
 * [3]  Sun, Lin & Gezelter, J. Chem. Phys. 128, 234107 (2008).          
 * [4] Kuang & Gezelter,  J. Chem. Phys. 133, 164101 (2010).
 */


#include <algorithm>
#include <fstream>
#include "applications/staticProps/RNEMDStats.hpp"
#include "primitives/Molecule.hpp"
#include "utils/PhysicalConstants.hpp"

namespace OpenMD {
  
  RNEMDZ::RNEMDZ(SimInfo* info, const std::string& filename, 
                 const std::string& sele, int nzbins)
    : SlabStatistics(info, filename, sele, nzbins) {
        
    setOutputName(getPrefix(filename) + ".rnemdZ");
    
    temperature = new OutputData;
    temperature->units =  "K";
    temperature->title =  "Temperature";
    temperature->dataType = odtReal;
    temperature->dataHandling = odhAverage;
    temperature->accumulator.reserve(nBins_);
    for (int i = 0; i < nBins_; i++) 
      temperature->accumulator.push_back( new Accumulator() );
    data_.push_back(temperature);
    
    velocity = new OutputData;
    velocity->units = "angstroms/fs";
    velocity->title =  "Velocity";  
    velocity->dataType = odtVector3;
    velocity->dataHandling = odhAverage;
    velocity->accumulator.reserve(nBins_);
    for (int i = 0; i < nBins_; i++) 
      velocity->accumulator.push_back( new VectorAccumulator() );
    data_.push_back(velocity);
    
    density = new OutputData;
    density->units =  "g cm^-3";
    density->title =  "Density";
    density->dataType = odtReal;
    density->dataHandling = odhAverage;
    density->accumulator.reserve(nBins_);
    for (int i = 0; i < nBins_; i++) 
      density->accumulator.push_back( new Accumulator() );
    data_.push_back(density);
  }

  void RNEMDZ::processFrame(int istep) {
    RealType z;

    hmat_ = currentSnapshot_->getHmat();
    for (int i = 0; i < nBins_; i++) {
      z = (((RealType)i + 0.5) / (RealType)nBins_) * hmat_(2,2);
      dynamic_cast<Accumulator*>(z_->accumulator[i])->add(z);
    }
    volume_ = currentSnapshot_->getVolume();


    Molecule* mol;
    RigidBody* rb;
    StuntDouble* sd;
    SimInfo::MoleculeIterator mi;
    Molecule::RigidBodyIterator rbIter;
    int i;

    vector<RealType> binMass(nBins_, 0.0);
    vector<Vector3d> binVel(nBins_, V3Zero);
    vector<RealType> binKE(nBins_, 0.0);
    vector<unsigned int> binDof(nBins_, 0);
    vector<unsigned int> binCount(nBins_, 0);
    
    
    for (mol = info_->beginMolecule(mi); mol != NULL; 
         mol = info_->nextMolecule(mi)) {
      
      // change the positions of atoms which belong to the rigidbodies
      
      for (rb = mol->beginRigidBody(rbIter); rb != NULL; 
           rb = mol->nextRigidBody(rbIter)) {
        rb->updateAtoms();
      }
    }
   
    if (evaluator_.isDynamic()) {
      seleMan_.setSelectionSet(evaluator_.evaluate());
    }
    
    // loop over the selected atoms:
    
    for (sd = seleMan_.beginSelected(i); sd != NULL; 
         sd = seleMan_.nextSelected(i)) {
      
      // figure out where that object is:
      Vector3d pos = sd->getPos(); 
      Vector3d vel = sd->getVel();
      RealType m = sd->getMass();

      int bin = getBin(pos);

      binCount[bin] += 1;

      binMass[bin] += m;
      binVel[bin] += vel;
      binKE[bin] += 0.5 * (m * vel.lengthSquare());
      binDof[bin] += 3;
      
      if (sd->isDirectional()) {
        Vector3d angMom = sd->getJ();
        Mat3x3d I = sd->getI();
        if (sd->isLinear()) {
          int i = sd->linearAxis();
          int j = (i + 1) % 3;
          int k = (i + 2) % 3;
          binKE[bin] += 0.5 * (angMom[j] * angMom[j] / I(j, j) + 
                               angMom[k] * angMom[k] / I(k, k));
          binDof[bin] += 2;
        } else {
          binKE[bin] += 0.5 * (angMom[0] * angMom[0] / I(0, 0) +
                               angMom[1] * angMom[1] / I(1, 1) +
                               angMom[2] * angMom[2] / I(2, 2));
          binDof[bin] += 3;
        }
      }
    }
    
    for (unsigned int i = 0; i < nBins_; i++) {

      if (binDof[i] > 0) {
        RealType temp = 2.0 * binKE[i] / (binDof[i] * PhysicalConstants::kb *
                                          PhysicalConstants::energyConvert);
        RealType den = binMass[i] * nBins_ * PhysicalConstants::densityConvert 
          / volume_;
        Vector3d vel = binVel[i] / RealType(binCount[i]);
        dynamic_cast<Accumulator *>(temperature->accumulator[i])->add(temp);
        dynamic_cast<VectorAccumulator *>(velocity->accumulator[i])->add(vel);
        dynamic_cast<Accumulator *>(density->accumulator[i])->add(den);
        dynamic_cast<Accumulator *>(counts_->accumulator[i])->add(1);
      }
    }
  }
  
  void RNEMDZ::processStuntDouble(StuntDouble* sd, int bin) {
  }

  RNEMDR::RNEMDR(SimInfo* info, const std::string& filename, 
                 const std::string& sele, int nrbins)
    : ShellStatistics(info, filename, sele, nrbins) {
        

    setOutputName(getPrefix(filename) + ".rnemdR");
    
    temperature = new OutputData;
    temperature->units =  "K";
    temperature->title =  "Temperature";
    temperature->dataType = odtReal;
    temperature->dataHandling = odhAverage;
    temperature->accumulator.reserve(nBins_);
    for (int i = 0; i < nBins_; i++) 
      temperature->accumulator.push_back( new Accumulator() );
    data_.push_back(temperature);
    
    angularVelocity = new OutputData;
    angularVelocity->units = "angstroms^2/fs";
    angularVelocity->title =  "Velocity";  
    angularVelocity->dataType = odtVector3;
    angularVelocity->dataHandling = odhAverage;
    angularVelocity->accumulator.reserve(nBins_);
    for (int i = 0; i < nBins_; i++) 
      angularVelocity->accumulator.push_back( new VectorAccumulator() );
    data_.push_back(angularVelocity);
    
    density = new OutputData;
    density->units =  "g cm^-3";
    density->title =  "Density";
    density->dataType = odtReal;
    density->dataHandling = odhAverage;
    density->accumulator.reserve(nBins_);
    for (int i = 0; i < nBins_; i++) 
      density->accumulator.push_back( new Accumulator() );
    data_.push_back(density);
  }

  void RNEMDR::processStuntDouble(StuntDouble* sd, int bin) {
    RealType mass = sd->getMass();
    Vector3d vel = sd->getVel();
    Vector3d rPos = sd->getPos() - coordinateOrigin_;
    Vector3d aVel = cross(rPos, vel);

    RealType KE = 0.5 * (mass * vel.lengthSquare());
    int dof = 3;

    if (sd->isDirectional()) {
      Vector3d angMom = sd->getJ();
      Mat3x3d I = sd->getI();
      if (sd->isLinear()) {
        int i = sd->linearAxis();
        int j = (i + 1) % 3;
        int k = (i + 2) % 3;
        KE += 0.5 * (angMom[j] * angMom[j] / I(j, j) + 
                     angMom[k] * angMom[k] / I(k, k));
        dof += 2;
      } else {
        KE += 0.5 * (angMom[0] * angMom[0] / I(0, 0) +
                     angMom[1] * angMom[1] / I(1, 1) +
                     angMom[2] * angMom[2] / I(2, 2));
        dof += 3;
      }
    }
    
    RealType temp = 2.0 * KE / (dof * PhysicalConstants::kb *
                                PhysicalConstants::energyConvert);

    RealType rinner = (RealType)bin * binWidth_;
    RealType router = (RealType)(bin+1) * binWidth_;
    RealType den = mass * 3.0 * PhysicalConstants::densityConvert
      / (4.0 * M_PI * (pow(router,3) - pow(rinner,3)));  
    
    dynamic_cast<Accumulator *>(temperature->accumulator[bin])->add(temp);
    dynamic_cast<VectorAccumulator *>(angularVelocity->accumulator[bin])->add(aVel);
    dynamic_cast<Accumulator *>(density->accumulator[bin])->add(den);

  }
}

Revision:	1885
Committed:	Tue Jun 18 17:16:15 2013 UTC (12 years, 4 months ago) by gezelter
File size:	9488 byte(s)
Log Message:	Added processFrame to RNEMDr
#	Content
1	/*
2	* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3	*
4	* The University of Notre Dame grants you ("Licensee") a
5	* non-exclusive, royalty free, license to use, modify and
6	* redistribute this software in source and binary code form, provided
7	* that the following conditions are met:
8	*
9	* 1. Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.
11	*
12	* 2. Redistributions in binary form must reproduce the above copyright
13	* notice, this list of conditions and the following disclaimer in the
14	* documentation and/or other materials provided with the
15	* distribution.
16	*
17	* This software is provided "AS IS," without a warranty of any
18	* kind. All express or implied conditions, representations and
19	* warranties, including any implied warranty of merchantability,
20	* fitness for a particular purpose or non-infringement, are hereby
21	* excluded. The University of Notre Dame and its licensors shall not
22	* be liable for any damages suffered by licensee as a result of
23	* using, modifying or distributing the software or its
24	* derivatives. In no event will the University of Notre Dame or its
25	* licensors be liable for any lost revenue, profit or data, or for
26	* direct, indirect, special, consequential, incidental or punitive
27	* damages, however caused and regardless of the theory of liability,
28	* arising out of the use of or inability to use software, even if the
29	* University of Notre Dame has been advised of the possibility of
30	* such damages.
31	*
32	* SUPPORT OPEN SCIENCE! If you use OpenMD or its source code in your
33	* research, please cite the appropriate papers when you publish your
34	* work. Good starting points are:
35	*
36	* [1] Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).
37	* [2] Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).
38	* [3] Sun, Lin & Gezelter, J. Chem. Phys. 128, 234107 (2008).
39	* [4] Kuang & Gezelter, J. Chem. Phys. 133, 164101 (2010).
40	*/
41
42
43	#include <algorithm>
44	#include <fstream>
45	#include "applications/staticProps/RNEMDStats.hpp"
46	#include "primitives/Molecule.hpp"
47	#include "utils/PhysicalConstants.hpp"
48
49	namespace OpenMD {
50
51	RNEMDZ::RNEMDZ(SimInfo* info, const std::string& filename,
52	const std::string& sele, int nzbins)
53	: SlabStatistics(info, filename, sele, nzbins) {
54
55	setOutputName(getPrefix(filename) + ".rnemdZ");
56
57	temperature = new OutputData;
58	temperature->units = "K";
59	temperature->title = "Temperature";
60	temperature->dataType = odtReal;
61	temperature->dataHandling = odhAverage;
62	temperature->accumulator.reserve(nBins_);
63	for (int i = 0; i < nBins_; i++)
64	temperature->accumulator.push_back( new Accumulator() );
65	data_.push_back(temperature);
66
67	velocity = new OutputData;
68	velocity->units = "angstroms/fs";
69	velocity->title = "Velocity";
70	velocity->dataType = odtVector3;
71	velocity->dataHandling = odhAverage;
72	velocity->accumulator.reserve(nBins_);
73	for (int i = 0; i < nBins_; i++)
74	velocity->accumulator.push_back( new VectorAccumulator() );
75	data_.push_back(velocity);
76
77	density = new OutputData;
78	density->units = "g cm^-3";
79	density->title = "Density";
80	density->dataType = odtReal;
81	density->dataHandling = odhAverage;
82	density->accumulator.reserve(nBins_);
83	for (int i = 0; i < nBins_; i++)
84	density->accumulator.push_back( new Accumulator() );
85	data_.push_back(density);
86	}
87
88	void RNEMDZ::processFrame(int istep) {
89	RealType z;
90
91	hmat_ = currentSnapshot_->getHmat();
92	for (int i = 0; i < nBins_; i++) {
93	z = (((RealType)i + 0.5) / (RealType)nBins_) * hmat_(2,2);
94	dynamic_cast<Accumulator*>(z_->accumulator[i])->add(z);
95	}
96	volume_ = currentSnapshot_->getVolume();
97
98
99	Molecule* mol;
100	RigidBody* rb;
101	StuntDouble* sd;
102	SimInfo::MoleculeIterator mi;
103	Molecule::RigidBodyIterator rbIter;
104	int i;
105
106	vector<RealType> binMass(nBins_, 0.0);
107	vector<Vector3d> binVel(nBins_, V3Zero);
108	vector<RealType> binKE(nBins_, 0.0);
109	vector<unsigned int> binDof(nBins_, 0);
110	vector<unsigned int> binCount(nBins_, 0);
111
112
113	for (mol = info_->beginMolecule(mi); mol != NULL;
114	mol = info_->nextMolecule(mi)) {
115
116	// change the positions of atoms which belong to the rigidbodies
117
118	for (rb = mol->beginRigidBody(rbIter); rb != NULL;
119	rb = mol->nextRigidBody(rbIter)) {
120	rb->updateAtoms();
121	}
122	}
123
124	if (evaluator_.isDynamic()) {
125	seleMan_.setSelectionSet(evaluator_.evaluate());
126	}
127
128	// loop over the selected atoms:
129
130	for (sd = seleMan_.beginSelected(i); sd != NULL;
131	sd = seleMan_.nextSelected(i)) {
132
133	// figure out where that object is:
134	Vector3d pos = sd->getPos();
135	Vector3d vel = sd->getVel();
136	RealType m = sd->getMass();
137
138	int bin = getBin(pos);
139
140	binCount[bin] += 1;
141
142	binMass[bin] += m;
143	binVel[bin] += vel;
144	binKE[bin] += 0.5 * (m * vel.lengthSquare());
145	binDof[bin] += 3;
146
147	if (sd->isDirectional()) {
148	Vector3d angMom = sd->getJ();
149	Mat3x3d I = sd->getI();
150	if (sd->isLinear()) {
151	int i = sd->linearAxis();
152	int j = (i + 1) % 3;
153	int k = (i + 2) % 3;
154	binKE[bin] += 0.5 * (angMom[j] * angMom[j] / I(j, j) +
155	angMom[k] * angMom[k] / I(k, k));
156	binDof[bin] += 2;
157	} else {
158	binKE[bin] += 0.5 * (angMom[0] * angMom[0] / I(0, 0) +
159	angMom[1] * angMom[1] / I(1, 1) +
160	angMom[2] * angMom[2] / I(2, 2));
161	binDof[bin] += 3;
162	}
163	}
164	}
165
166	for (unsigned int i = 0; i < nBins_; i++) {
167
168	if (binDof[i] > 0) {
169	RealType temp = 2.0 * binKE[i] / (binDof[i] * PhysicalConstants::kb *
170	PhysicalConstants::energyConvert);
171	RealType den = binMass[i] * nBins_ * PhysicalConstants::densityConvert
172	/ volume_;
173	Vector3d vel = binVel[i] / RealType(binCount[i]);
174	dynamic_cast<Accumulator *>(temperature->accumulator[i])->add(temp);
175	dynamic_cast<VectorAccumulator *>(velocity->accumulator[i])->add(vel);
176	dynamic_cast<Accumulator *>(density->accumulator[i])->add(den);
177	dynamic_cast<Accumulator *>(counts_->accumulator[i])->add(1);
178	}
179	}
180	}
181
182	void RNEMDZ::processStuntDouble(StuntDouble* sd, int bin) {
183	}
184
185	RNEMDR::RNEMDR(SimInfo* info, const std::string& filename,
186	const std::string& sele, int nrbins)
187	: ShellStatistics(info, filename, sele, nrbins) {
188
189
190	setOutputName(getPrefix(filename) + ".rnemdR");
191
192	temperature = new OutputData;
193	temperature->units = "K";
194	temperature->title = "Temperature";
195	temperature->dataType = odtReal;
196	temperature->dataHandling = odhAverage;
197	temperature->accumulator.reserve(nBins_);
198	for (int i = 0; i < nBins_; i++)
199	temperature->accumulator.push_back( new Accumulator() );
200	data_.push_back(temperature);
201
202	angularVelocity = new OutputData;
203	angularVelocity->units = "angstroms^2/fs";
204	angularVelocity->title = "Velocity";
205	angularVelocity->dataType = odtVector3;
206	angularVelocity->dataHandling = odhAverage;
207	angularVelocity->accumulator.reserve(nBins_);
208	for (int i = 0; i < nBins_; i++)
209	angularVelocity->accumulator.push_back( new VectorAccumulator() );
210	data_.push_back(angularVelocity);
211
212	density = new OutputData;
213	density->units = "g cm^-3";
214	density->title = "Density";
215	density->dataType = odtReal;
216	density->dataHandling = odhAverage;
217	density->accumulator.reserve(nBins_);
218	for (int i = 0; i < nBins_; i++)
219	density->accumulator.push_back( new Accumulator() );
220	data_.push_back(density);
221	}
222
223	void RNEMDR::processStuntDouble(StuntDouble* sd, int bin) {
224	RealType mass = sd->getMass();
225	Vector3d vel = sd->getVel();
226	Vector3d rPos = sd->getPos() - coordinateOrigin_;
227	Vector3d aVel = cross(rPos, vel);
228
229	RealType KE = 0.5 * (mass * vel.lengthSquare());
230	int dof = 3;
231
232	if (sd->isDirectional()) {
233	Vector3d angMom = sd->getJ();
234	Mat3x3d I = sd->getI();
235	if (sd->isLinear()) {
236	int i = sd->linearAxis();
237	int j = (i + 1) % 3;
238	int k = (i + 2) % 3;
239	KE += 0.5 * (angMom[j] * angMom[j] / I(j, j) +
240	angMom[k] * angMom[k] / I(k, k));
241	dof += 2;
242	} else {
243	KE += 0.5 * (angMom[0] * angMom[0] / I(0, 0) +
244	angMom[1] * angMom[1] / I(1, 1) +
245	angMom[2] * angMom[2] / I(2, 2));
246	dof += 3;
247	}
248	}
249
250	RealType temp = 2.0 * KE / (dof * PhysicalConstants::kb *
251	PhysicalConstants::energyConvert);
252
253	RealType rinner = (RealType)bin * binWidth_;
254	RealType router = (RealType)(bin+1) * binWidth_;
255	RealType den = mass * 3.0 * PhysicalConstants::densityConvert
256	/ (4.0 * M_PI * (pow(router,3) - pow(rinner,3)));
257
258	dynamic_cast<Accumulator *>(temperature->accumulator[bin])->add(temp);
259	dynamic_cast<VectorAccumulator *>(angularVelocity->accumulator[bin])->add(aVel);
260	dynamic_cast<Accumulator *>(density->accumulator[bin])->add(den);
261
262	}
263	}
264