src/brains/Snapshot.cpp

/*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 *
 * SUPPORT OPEN SCIENCE!  If you use OpenMD or its source code in your
 * research, please cite the appropriate papers when you publish your
 * work.  Good starting points are:
 *                                                                      
 * [1]  Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).             
 * [2]  Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).          
 * [3]  Sun, Lin & Gezelter, J. Chem. Phys. 128, 234107 (2008).          
 * [4]  Kuang & Gezelter,  J. Chem. Phys. 133, 164101 (2010).
 * [5]  Vardeman, Stocker & Gezelter, J. Chem. Theory Comput. 7, 834 (2011).
 */
  
/**
 * @file Snapshot.cpp
 * @author tlin
 * @date 11/11/2004
 * @version 1.0
 */

#include "brains/Snapshot.hpp"
#include "utils/NumericConstant.hpp"
#include "utils/simError.h"
#include "utils/Utility.hpp"
#include <cstdio>

namespace OpenMD {

  Snapshot::Snapshot(int nAtoms, int nRigidbodies, int nCutoffGroups) : 
    atomData(nAtoms), rigidbodyData(nRigidbodies),
    cgData(nCutoffGroups, DataStorage::dslPosition), 
    orthoTolerance_(1e-6) {
    
    frameData.id = -1;                   
    frameData.currentTime = 0;     
    frameData.hmat = Mat3x3d(0.0);             
    frameData.invHmat = Mat3x3d(0.0);          
    frameData.orthoRhombic = false;        
    frameData.bondPotential = 0.0;      
    frameData.bendPotential = 0.0;      
    frameData.torsionPotential = 0.0;   
    frameData.inversionPotential = 0.0; 
    frameData.lrPotentials = potVec(0.0);
    frameData.excludedPotentials = potVec(0.0); 
    frameData.restraintPotential = 0.0; 
    frameData.rawPotential = 0.0;   
    frameData.xyArea = 0.0;
    frameData.volume = 0.0;          
    frameData.thermostat = make_pair(0.0, 0.0);
    frameData.electronicThermostat = make_pair(0.0, 0.0);
    frameData.barostat = Mat3x3d(0.0);              
    frameData.stressTensor = Mat3x3d(0.0);              
    frameData.conductiveHeatFlux = Vector3d(0.0, 0.0, 0.0);

    clearDerivedProperties();
  }
  
  Snapshot::Snapshot(int nAtoms, int nRigidbodies, int nCutoffGroups, 
                     int storageLayout) : 
    atomData(nAtoms, storageLayout), 
    rigidbodyData(nRigidbodies, storageLayout),
    cgData(nCutoffGroups, DataStorage::dslPosition),
    orthoTolerance_(1e-6) {
    
    frameData.id = -1;                   
    frameData.currentTime = 0;     
    frameData.hmat = Mat3x3d(0.0);             
    frameData.invHmat = Mat3x3d(0.0);      
    frameData.bBox = Mat3x3d(0.0);             
    frameData.invBbox = Mat3x3d(0.0);
    frameData.orthoRhombic = false;        
    frameData.bondPotential = 0.0;      
    frameData.bendPotential = 0.0;      
    frameData.torsionPotential = 0.0;   
    frameData.inversionPotential = 0.0; 
    frameData.lrPotentials = potVec(0.0);
    frameData.excludedPotentials = potVec(0.0); 
    frameData.restraintPotential = 0.0; 
    frameData.rawPotential = 0.0;       
    frameData.xyArea = 0.0;
    frameData.volume = 0.0;          
    frameData.thermostat = make_pair(0.0, 0.0);
    frameData.electronicThermostat = make_pair(0.0, 0.0);
    frameData.barostat = Mat3x3d(0.0);              
    frameData.stressTensor = Mat3x3d(0.0);              
    frameData.conductiveHeatFlux = Vector3d(0.0, 0.0, 0.0);

    clearDerivedProperties();
  }

  void Snapshot::clearDerivedProperties() {
    frameData.totalEnergy = 0.0;     
    frameData.translationalKinetic = 0.0;   
    frameData.rotationalKinetic = 0.0;   
    frameData.kineticEnergy = 0.0;   
    frameData.potentialEnergy = 0.0; 
    frameData.shortRangePotential = 0.0;
    frameData.longRangePotential = 0.0; 
    frameData.pressure = 0.0;        
    frameData.temperature = 0.0;
    frameData.pressureTensor = Mat3x3d(0.0);   
    frameData.systemDipole = Vector3d(0.0);            
    frameData.convectiveHeatFlux = Vector3d(0.0, 0.0, 0.0);
    frameData.electronicTemperature = 0.0;
    frameData.COM = V3Zero;             
    frameData.COMvel = V3Zero;          
    frameData.COMw = V3Zero;  

    hasTotalEnergy = false;         
    hasTranslationalKineticEnergy = false;       
    hasRotationalKineticEnergy = false;       
    hasKineticEnergy = false;       
    hasShortRangePotential = false;
    hasLongRangePotential = false;
    hasPotentialEnergy = false;   
    hasXYarea = false;
    hasVolume = false;         
    hasPressure = false;       
    hasTemperature = false;    
    hasElectronicTemperature = false;
    hasCOM = false;
    hasCOMvel = false;
    hasCOMw = false;
    hasPressureTensor = false;    
    hasSystemDipole = false;      
    hasConvectiveHeatFlux = false;  
    hasInertiaTensor = false;
    hasGyrationalVolume = false;   
    hasHullVolume = false;
    hasConservedQuantity = false; 
    hasBoundingBox = false;
  }

  /** Returns the id of this Snapshot */
  int Snapshot::getID() {
    return frameData.id;
  }
  
  /** Sets the id of this Snapshot */
  void Snapshot::setID(int id) {
    frameData.id = id;
  }
  
  int Snapshot::getSize() {
    return atomData.getSize() + rigidbodyData.getSize();
  }
  
  /** Returns the number of atoms */
  int Snapshot::getNumberOfAtoms() {
    return atomData.getSize();
  }
  
  /** Returns the number of rigid bodies */
  int Snapshot::getNumberOfRigidBodies() {
    return rigidbodyData.getSize();
  }
  
  /** Returns the number of rigid bodies */
  int Snapshot::getNumberOfCutoffGroups() {
    return cgData.getSize();
  }
  
  /** Returns the H-Matrix */
  Mat3x3d Snapshot::getHmat() {
    return frameData.hmat;
  }

  /** Sets the H-Matrix */  
  void Snapshot::setHmat(const Mat3x3d& m) {
    hasVolume = false;
    frameData.hmat = m;
    frameData.invHmat = frameData.hmat.inverse();
    
    //determine whether the box is orthoTolerance or not
    bool oldOrthoRhombic = frameData.orthoRhombic;
    
    RealType smallDiag = fabs(frameData.hmat(0, 0));
    if(smallDiag > fabs(frameData.hmat(1, 1))) smallDiag = fabs(frameData.hmat(1, 1));
    if(smallDiag > fabs(frameData.hmat(2, 2))) smallDiag = fabs(frameData.hmat(2, 2));    
    RealType tol = smallDiag * orthoTolerance_;

    frameData.orthoRhombic = true;

    for (int i = 0; i < 3; i++ ) {
      for (int j = 0 ; j < 3; j++) {
        if (i != j) {
          if (frameData.orthoRhombic) {
            if ( fabs(frameData.hmat(i, j)) >= tol)
              frameData.orthoRhombic = false;
          }        
        }
      }
    }
    
    if( oldOrthoRhombic != frameData.orthoRhombic){
      
      // It is finally time to suppress these warnings once and for
      // all.  They were annoying and not very informative.

      // if( frameData.orthoRhombic ) {
      //   sprintf( painCave.errMsg,
      //         "OpenMD is switching from the default Non-Orthorhombic\n"
      //         "\tto the faster Orthorhombic periodic boundary computations.\n"
      //         "\tThis is usually a good thing, but if you want the\n"
      //         "\tNon-Orthorhombic computations, make the orthoBoxTolerance\n"
      //         "\tvariable ( currently set to %G ) smaller.\n",
      //         orthoTolerance_);
      //   painCave.severity = OPENMD_INFO;
      //   simError();
      // }
      // else {
      //   sprintf( painCave.errMsg,
      //         "OpenMD is switching from the faster Orthorhombic to the more\n"
      //         "\tflexible Non-Orthorhombic periodic boundary computations.\n"
      //         "\tThis is usually because the box has deformed under\n"
      //         "\tNPTf integration. If you want to live on the edge with\n"
      //         "\tthe Orthorhombic computations, make the orthoBoxTolerance\n"
      //         "\tvariable ( currently set to %G ) larger.\n",
      //         orthoTolerance_);
      //   painCave.severity = OPENMD_WARNING;
      //   simError();
      // }
    }    
  }
  
  /** Returns the inverse H-Matrix */
  Mat3x3d Snapshot::getInvHmat() {
    return frameData.invHmat;
  }

  /** Returns the Bounding Box */
  Mat3x3d Snapshot::getBoundingBox() {
    return frameData.bBox;
  }

  /** Sets the Bounding Box */  
  void Snapshot::setBoundingBox(const Mat3x3d& m) {
    frameData.bBox = m;
    frameData.invBbox = frameData.bBox.inverse();
    hasBoundingBox = true;
  }

  /** Returns the inverse Bounding Box */
  Mat3x3d Snapshot::getInvBoundingBox() {
    return frameData.invBbox;
  }

  RealType Snapshot::getXYarea() {
    if (!hasXYarea) {
      Vector3d x = frameData.hmat.getColumn(0);
      Vector3d y = frameData.hmat.getColumn(1);
      frameData.xyArea = cross(x,y).length();
      hasXYarea = true;
    }
    return frameData.xyArea;
  }

  RealType Snapshot::getVolume() {
    if (!hasVolume) {
      frameData.volume = frameData.hmat.determinant();
      hasVolume = true;
    }
    return frameData.volume;
  }

  void Snapshot::setVolume(RealType vol) {
    hasVolume = true;
    frameData.volume = vol;
  }

  /** Wrap a vector according to periodic boundary conditions */
  void Snapshot::wrapVector(Vector3d& pos) {
    
    Vector3d scaled = scaleVector(pos);
    
    for (int i = 0; i < 3; i++) 
      scaled[i] -= roundMe(scaled[i]);
    
    if( !frameData.orthoRhombic )
      pos = frameData.hmat * scaled;    
    else {
      
      // calc the wrapped real coordinates from the wrapped scaled coordinates
      for (int i=0; i<3; i++) {
        pos[i] = scaled[i] * frameData.hmat(i, i);
      }   
    }
  }

  /** Scaling a vector to multiples of the periodic box */
  inline Vector3d Snapshot::scaleVector(Vector3d& pos) {   
    
    Vector3d scaled;

    if( !frameData.orthoRhombic )
      scaled = frameData.invHmat * pos;
    else {
      // calc the scaled coordinates.
      for (int i=0; i<3; i++) 
        scaled[i] = pos[i] * frameData.invHmat(i, i);
    }

    return scaled;
  }

  void Snapshot::setCOM(const Vector3d& com) {
    frameData.COM = com;
    hasCOM = true;
  }
  
  void Snapshot::setCOMvel(const Vector3d& comVel) {
    frameData.COMvel = comVel;
    hasCOMvel = true;
  }
  
  void Snapshot::setCOMw(const Vector3d& comw) {
    frameData.COMw = comw;
    hasCOMw = true;
  }
  
  Vector3d Snapshot::getCOM() {
    return frameData.COM;
  }
  
  Vector3d Snapshot::getCOMvel() {
    return frameData.COMvel;
  }
  
  Vector3d Snapshot::getCOMw() {
    return frameData.COMw;
  }
  
  RealType Snapshot::getTime() {
    return frameData.currentTime;
  }
  
  void Snapshot::increaseTime(RealType dt) {
    setTime(getTime() + dt);
  }
  
  void Snapshot::setTime(RealType time) {
    frameData.currentTime = time;
  }
 
  void Snapshot::setBondPotential(RealType bp) {
    frameData.bondPotential = bp;
  }
  
  void Snapshot::setBendPotential(RealType bp) {
    frameData.bendPotential = bp;
  }
  
  void Snapshot::setTorsionPotential(RealType tp) {
    frameData.torsionPotential = tp;
  }
  
  void Snapshot::setInversionPotential(RealType ip) {
    frameData.inversionPotential = ip;
  }


  RealType Snapshot::getBondPotential() {
    return frameData.bondPotential;
  }
  RealType Snapshot::getBendPotential() {
    return frameData.bendPotential;
  }
  RealType Snapshot::getTorsionPotential() {
    return frameData.torsionPotential;
  }
  RealType Snapshot::getInversionPotential() {
    return frameData.inversionPotential;
  }

  RealType Snapshot::getShortRangePotential() {
    if (!hasShortRangePotential) {
      frameData.shortRangePotential = frameData.bondPotential;
      frameData.shortRangePotential += frameData.bendPotential;
      frameData.shortRangePotential += frameData.torsionPotential;
      frameData.shortRangePotential += frameData.inversionPotential;
      hasShortRangePotential = true;
    }
    return frameData.shortRangePotential;
  }

  void Snapshot::setLongRangePotential(potVec lrPot) {
    frameData.lrPotentials = lrPot;
  }
    
  RealType Snapshot::getLongRangePotential() {
    if (!hasLongRangePotential) {
      for (int i = 0; i < N_INTERACTION_FAMILIES; i++) {
        frameData.longRangePotential += frameData.lrPotentials[i];
      }
      hasLongRangePotential = true;
    }   
    return frameData.longRangePotential;
  }

  potVec Snapshot::getLongRangePotentials() {
    return frameData.lrPotentials;
  }

  RealType Snapshot::getPotentialEnergy() {
    if (!hasPotentialEnergy) {
      frameData.potentialEnergy = this->getLongRangePotential();
      frameData.potentialEnergy += this->getShortRangePotential();
      hasPotentialEnergy = true;
    }
    return frameData.potentialEnergy;
  }
    
  void Snapshot::setExcludedPotentials(potVec exPot) {
    frameData.excludedPotentials = exPot;
  }

  potVec Snapshot::getExcludedPotentials() {
    return frameData.excludedPotentials;
  }
      
  void Snapshot::setRestraintPotential(RealType rp) {
    frameData.restraintPotential = rp;
  }
  
  RealType Snapshot::getRestraintPotential() {
    return frameData.restraintPotential;
  }
  
  void Snapshot::setRawPotential(RealType rp) {
    frameData.rawPotential = rp;
  }
  
  RealType Snapshot::getRawPotential() {
    return frameData.rawPotential;
  }

  RealType Snapshot::getTranslationalKineticEnergy() {
    return frameData.translationalKinetic;
  }

  RealType Snapshot::getRotationalKineticEnergy() {
    return frameData.rotationalKinetic;
  }

  RealType Snapshot::getKineticEnergy() {
    return frameData.kineticEnergy;
  }

  void Snapshot::setTranslationalKineticEnergy(RealType tke) {
    hasTranslationalKineticEnergy = true;
    frameData.translationalKinetic = tke;
  }

  void Snapshot::setRotationalKineticEnergy(RealType rke) {
    hasRotationalKineticEnergy = true;
    frameData.rotationalKinetic = rke;
  }

  void Snapshot::setKineticEnergy(RealType ke) {
    hasKineticEnergy = true;
    frameData.kineticEnergy = ke;
  }

  RealType Snapshot::getTotalEnergy() {
    return frameData.totalEnergy;
  }

  void Snapshot::setTotalEnergy(RealType te) {
    hasTotalEnergy = true;
    frameData.totalEnergy = te;
  }

  RealType Snapshot::getConservedQuantity() {
    return frameData.conservedQuantity;
  }

  void Snapshot::setConservedQuantity(RealType cq) {
    hasConservedQuantity = true;
    frameData.conservedQuantity = cq;
  }

  RealType Snapshot::getTemperature() {
    return frameData.temperature;
  }

  void Snapshot::setTemperature(RealType temp) {
    hasTemperature = true;
    frameData.temperature = temp;
  }

  RealType Snapshot::getElectronicTemperature() {
    return frameData.electronicTemperature;
  }

  void Snapshot::setElectronicTemperature(RealType eTemp) {
    hasElectronicTemperature = true;
    frameData.electronicTemperature = eTemp;
  }

  RealType Snapshot::getPressure() {
    return frameData.pressure;
  }

  void Snapshot::setPressure(RealType pressure) {
    hasPressure = true;
    frameData.pressure = pressure;
  }

  Mat3x3d Snapshot::getPressureTensor() {
    return frameData.pressureTensor;
  }


  void Snapshot::setPressureTensor(const Mat3x3d& pressureTensor) {
    hasPressureTensor = true;
    frameData.pressureTensor = pressureTensor;
  }

  void Snapshot::setStressTensor(const Mat3x3d& stressTensor) {
    frameData.stressTensor = stressTensor;
  }

  Mat3x3d  Snapshot::getStressTensor() {
    return frameData.stressTensor;
  }

  void Snapshot::setConductiveHeatFlux(const Vector3d& chf) {
    frameData.conductiveHeatFlux = chf;
  }

  Vector3d Snapshot::getConductiveHeatFlux() {
    return frameData.conductiveHeatFlux;
  }
  
  Vector3d Snapshot::getConvectiveHeatFlux() {
    return frameData.convectiveHeatFlux;
  }

  void Snapshot::setConvectiveHeatFlux(const Vector3d& chf) {    
    hasConvectiveHeatFlux = true;
    frameData.convectiveHeatFlux = chf;
  }

  Vector3d Snapshot::getHeatFlux() {
    // BE CAREFUL WITH UNITS
    return getConductiveHeatFlux() + getConvectiveHeatFlux();
  }

  Vector3d Snapshot::getSystemDipole() {
    return frameData.systemDipole;
  }

  void Snapshot::setSystemDipole(const Vector3d& bd) {    
    hasSystemDipole = true;
    frameData.systemDipole = bd;
  }

  void Snapshot::setThermostat(const pair<RealType, RealType>& thermostat) {
    frameData.thermostat = thermostat;
  }

  pair<RealType, RealType> Snapshot::getThermostat() {
    return frameData.thermostat;
  }

  void Snapshot::setElectronicThermostat(const pair<RealType, RealType>& eTherm) {
    frameData.electronicThermostat = eTherm;
  }

  pair<RealType, RealType> Snapshot::getElectronicThermostat() {
    return frameData.electronicThermostat;
  }
 
  void Snapshot::setBarostat(const Mat3x3d& barostat) {
    frameData.barostat = barostat;
  }

  Mat3x3d Snapshot::getBarostat() {
    return frameData.barostat;
  }

  void Snapshot::setInertiaTensor(const Mat3x3d& inertiaTensor) {
    frameData.inertiaTensor = inertiaTensor;
    hasInertiaTensor = true;
  }

  Mat3x3d Snapshot::getInertiaTensor() {
    return frameData.inertiaTensor;
  }

  void Snapshot::setGyrationalVolume(const RealType gyrationalVolume) {
    frameData.gyrationalVolume = gyrationalVolume;
    hasGyrationalVolume = true;
  }

  RealType Snapshot::getGyrationalVolume() {
    return frameData.gyrationalVolume;
  }

  void Snapshot::setHullVolume(const RealType hullVolume) {
    frameData.hullVolume = hullVolume;
    hasHullVolume = true;
  }

  RealType Snapshot::getHullVolume() {
    return frameData.hullVolume;
  }

  void Snapshot::setOrthoTolerance(RealType ot) {
    orthoTolerance_ = ot;
  }
}
Revision:	1879
Committed:	Sun Jun 16 15:15:42 2013 UTC (12 years, 4 months ago) by gezelter
File size:	18847 byte(s)
Log Message:	MERGE OpenMD development 1783:1878 into trunk
#	Content
1	/*
2	* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3	*
4	* The University of Notre Dame grants you ("Licensee") a
5	* non-exclusive, royalty free, license to use, modify and
6	* redistribute this software in source and binary code form, provided
7	* that the following conditions are met:
8	*
9	* 1. Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.
11	*
12	* 2. Redistributions in binary form must reproduce the above copyright
13	* notice, this list of conditions and the following disclaimer in the
14	* documentation and/or other materials provided with the
15	* distribution.
16	*
17	* This software is provided "AS IS," without a warranty of any
18	* kind. All express or implied conditions, representations and
19	* warranties, including any implied warranty of merchantability,
20	* fitness for a particular purpose or non-infringement, are hereby
21	* excluded. The University of Notre Dame and its licensors shall not
22	* be liable for any damages suffered by licensee as a result of
23	* using, modifying or distributing the software or its
24	* derivatives. In no event will the University of Notre Dame or its
25	* licensors be liable for any lost revenue, profit or data, or for
26	* direct, indirect, special, consequential, incidental or punitive
27	* damages, however caused and regardless of the theory of liability,
28	* arising out of the use of or inability to use software, even if the
29	* University of Notre Dame has been advised of the possibility of
30	* such damages.
31	*
32	* SUPPORT OPEN SCIENCE! If you use OpenMD or its source code in your
33	* research, please cite the appropriate papers when you publish your
34	* work. Good starting points are:
35	*
36	* [1] Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).
37	* [2] Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).
38	* [3] Sun, Lin & Gezelter, J. Chem. Phys. 128, 234107 (2008).
39	* [4] Kuang & Gezelter, J. Chem. Phys. 133, 164101 (2010).
40	* [5] Vardeman, Stocker & Gezelter, J. Chem. Theory Comput. 7, 834 (2011).
41	*/
42
43	/**
44	* @file Snapshot.cpp
45	* @author tlin
46	* @date 11/11/2004
47	* @version 1.0
48	*/
49
50	#include "brains/Snapshot.hpp"
51	#include "utils/NumericConstant.hpp"
52	#include "utils/simError.h"
53	#include "utils/Utility.hpp"
54	#include <cstdio>
55
56	namespace OpenMD {
57
58	Snapshot::Snapshot(int nAtoms, int nRigidbodies, int nCutoffGroups) :
59	atomData(nAtoms), rigidbodyData(nRigidbodies),
60	cgData(nCutoffGroups, DataStorage::dslPosition),
61	orthoTolerance_(1e-6) {
62
63	frameData.id = -1;
64	frameData.currentTime = 0;
65	frameData.hmat = Mat3x3d(0.0);
66	frameData.invHmat = Mat3x3d(0.0);
67	frameData.orthoRhombic = false;
68	frameData.bondPotential = 0.0;
69	frameData.bendPotential = 0.0;
70	frameData.torsionPotential = 0.0;
71	frameData.inversionPotential = 0.0;
72	frameData.lrPotentials = potVec(0.0);
73	frameData.excludedPotentials = potVec(0.0);
74	frameData.restraintPotential = 0.0;
75	frameData.rawPotential = 0.0;
76	frameData.xyArea = 0.0;
77	frameData.volume = 0.0;
78	frameData.thermostat = make_pair(0.0, 0.0);
79	frameData.electronicThermostat = make_pair(0.0, 0.0);
80	frameData.barostat = Mat3x3d(0.0);
81	frameData.stressTensor = Mat3x3d(0.0);
82	frameData.conductiveHeatFlux = Vector3d(0.0, 0.0, 0.0);
83
84	clearDerivedProperties();
85	}
86
87	Snapshot::Snapshot(int nAtoms, int nRigidbodies, int nCutoffGroups,
88	int storageLayout) :
89	atomData(nAtoms, storageLayout),
90	rigidbodyData(nRigidbodies, storageLayout),
91	cgData(nCutoffGroups, DataStorage::dslPosition),
92	orthoTolerance_(1e-6) {
93
94	frameData.id = -1;
95	frameData.currentTime = 0;
96	frameData.hmat = Mat3x3d(0.0);
97	frameData.invHmat = Mat3x3d(0.0);
98	frameData.bBox = Mat3x3d(0.0);
99	frameData.invBbox = Mat3x3d(0.0);
100	frameData.orthoRhombic = false;
101	frameData.bondPotential = 0.0;
102	frameData.bendPotential = 0.0;
103	frameData.torsionPotential = 0.0;
104	frameData.inversionPotential = 0.0;
105	frameData.lrPotentials = potVec(0.0);
106	frameData.excludedPotentials = potVec(0.0);
107	frameData.restraintPotential = 0.0;
108	frameData.rawPotential = 0.0;
109	frameData.xyArea = 0.0;
110	frameData.volume = 0.0;
111	frameData.thermostat = make_pair(0.0, 0.0);
112	frameData.electronicThermostat = make_pair(0.0, 0.0);
113	frameData.barostat = Mat3x3d(0.0);
114	frameData.stressTensor = Mat3x3d(0.0);
115	frameData.conductiveHeatFlux = Vector3d(0.0, 0.0, 0.0);
116
117	clearDerivedProperties();
118	}
119
120	void Snapshot::clearDerivedProperties() {
121	frameData.totalEnergy = 0.0;
122	frameData.translationalKinetic = 0.0;
123	frameData.rotationalKinetic = 0.0;
124	frameData.kineticEnergy = 0.0;
125	frameData.potentialEnergy = 0.0;
126	frameData.shortRangePotential = 0.0;
127	frameData.longRangePotential = 0.0;
128	frameData.pressure = 0.0;
129	frameData.temperature = 0.0;
130	frameData.pressureTensor = Mat3x3d(0.0);
131	frameData.systemDipole = Vector3d(0.0);
132	frameData.convectiveHeatFlux = Vector3d(0.0, 0.0, 0.0);
133	frameData.electronicTemperature = 0.0;
134	frameData.COM = V3Zero;
135	frameData.COMvel = V3Zero;
136	frameData.COMw = V3Zero;
137
138	hasTotalEnergy = false;
139	hasTranslationalKineticEnergy = false;
140	hasRotationalKineticEnergy = false;
141	hasKineticEnergy = false;
142	hasShortRangePotential = false;
143	hasLongRangePotential = false;
144	hasPotentialEnergy = false;
145	hasXYarea = false;
146	hasVolume = false;
147	hasPressure = false;
148	hasTemperature = false;
149	hasElectronicTemperature = false;
150	hasCOM = false;
151	hasCOMvel = false;
152	hasCOMw = false;
153	hasPressureTensor = false;
154	hasSystemDipole = false;
155	hasConvectiveHeatFlux = false;
156	hasInertiaTensor = false;
157	hasGyrationalVolume = false;
158	hasHullVolume = false;
159	hasConservedQuantity = false;
160	hasBoundingBox = false;
161	}
162
163	/** Returns the id of this Snapshot */
164	int Snapshot::getID() {
165	return frameData.id;
166	}
167
168	/** Sets the id of this Snapshot */
169	void Snapshot::setID(int id) {
170	frameData.id = id;
171	}
172
173	int Snapshot::getSize() {
174	return atomData.getSize() + rigidbodyData.getSize();
175	}
176
177	/** Returns the number of atoms */
178	int Snapshot::getNumberOfAtoms() {
179	return atomData.getSize();
180	}
181
182	/** Returns the number of rigid bodies */
183	int Snapshot::getNumberOfRigidBodies() {
184	return rigidbodyData.getSize();
185	}
186
187	/** Returns the number of rigid bodies */
188	int Snapshot::getNumberOfCutoffGroups() {
189	return cgData.getSize();
190	}
191
192	/** Returns the H-Matrix */
193	Mat3x3d Snapshot::getHmat() {
194	return frameData.hmat;
195	}
196
197	/** Sets the H-Matrix */
198	void Snapshot::setHmat(const Mat3x3d& m) {
199	hasVolume = false;
200	frameData.hmat = m;
201	frameData.invHmat = frameData.hmat.inverse();
202
203	//determine whether the box is orthoTolerance or not
204	bool oldOrthoRhombic = frameData.orthoRhombic;
205
206	RealType smallDiag = fabs(frameData.hmat(0, 0));
207	if(smallDiag > fabs(frameData.hmat(1, 1))) smallDiag = fabs(frameData.hmat(1, 1));
208	if(smallDiag > fabs(frameData.hmat(2, 2))) smallDiag = fabs(frameData.hmat(2, 2));
209	RealType tol = smallDiag * orthoTolerance_;
210
211	frameData.orthoRhombic = true;
212
213	for (int i = 0; i < 3; i++ ) {
214	for (int j = 0 ; j < 3; j++) {
215	if (i != j) {
216	if (frameData.orthoRhombic) {
217	if ( fabs(frameData.hmat(i, j)) >= tol)
218	frameData.orthoRhombic = false;
219	}
220	}
221	}
222	}
223
224	if( oldOrthoRhombic != frameData.orthoRhombic){
225
226	// It is finally time to suppress these warnings once and for
227	// all. They were annoying and not very informative.
228
229	// if( frameData.orthoRhombic ) {
230	// sprintf( painCave.errMsg,
231	// "OpenMD is switching from the default Non-Orthorhombic\n"
232	// "\tto the faster Orthorhombic periodic boundary computations.\n"
233	// "\tThis is usually a good thing, but if you want the\n"
234	// "\tNon-Orthorhombic computations, make the orthoBoxTolerance\n"
235	// "\tvariable ( currently set to %G ) smaller.\n",
236	// orthoTolerance_);
237	// painCave.severity = OPENMD_INFO;
238	// simError();
239	// }
240	// else {
241	// sprintf( painCave.errMsg,
242	// "OpenMD is switching from the faster Orthorhombic to the more\n"
243	// "\tflexible Non-Orthorhombic periodic boundary computations.\n"
244	// "\tThis is usually because the box has deformed under\n"
245	// "\tNPTf integration. If you want to live on the edge with\n"
246	// "\tthe Orthorhombic computations, make the orthoBoxTolerance\n"
247	// "\tvariable ( currently set to %G ) larger.\n",
248	// orthoTolerance_);
249	// painCave.severity = OPENMD_WARNING;
250	// simError();
251	// }
252	}
253	}
254
255	/** Returns the inverse H-Matrix */
256	Mat3x3d Snapshot::getInvHmat() {
257	return frameData.invHmat;
258	}
259
260	/** Returns the Bounding Box */
261	Mat3x3d Snapshot::getBoundingBox() {
262	return frameData.bBox;
263	}
264
265	/** Sets the Bounding Box */
266	void Snapshot::setBoundingBox(const Mat3x3d& m) {
267	frameData.bBox = m;
268	frameData.invBbox = frameData.bBox.inverse();
269	hasBoundingBox = true;
270	}
271
272	/** Returns the inverse Bounding Box */
273	Mat3x3d Snapshot::getInvBoundingBox() {
274	return frameData.invBbox;
275	}
276
277	RealType Snapshot::getXYarea() {
278	if (!hasXYarea) {
279	Vector3d x = frameData.hmat.getColumn(0);
280	Vector3d y = frameData.hmat.getColumn(1);
281	frameData.xyArea = cross(x,y).length();
282	hasXYarea = true;
283	}
284	return frameData.xyArea;
285	}
286
287	RealType Snapshot::getVolume() {
288	if (!hasVolume) {
289	frameData.volume = frameData.hmat.determinant();
290	hasVolume = true;
291	}
292	return frameData.volume;
293	}
294
295	void Snapshot::setVolume(RealType vol) {
296	hasVolume = true;
297	frameData.volume = vol;
298	}
299
300	/** Wrap a vector according to periodic boundary conditions */
301	void Snapshot::wrapVector(Vector3d& pos) {
302
303	Vector3d scaled = scaleVector(pos);
304
305	for (int i = 0; i < 3; i++)
306	scaled[i] -= roundMe(scaled[i]);
307
308	if( !frameData.orthoRhombic )
309	pos = frameData.hmat * scaled;
310	else {
311
312	// calc the wrapped real coordinates from the wrapped scaled coordinates
313	for (int i=0; i<3; i++) {
314	pos[i] = scaled[i] * frameData.hmat(i, i);
315	}
316	}
317	}
318
319	/** Scaling a vector to multiples of the periodic box */
320	inline Vector3d Snapshot::scaleVector(Vector3d& pos) {
321
322	Vector3d scaled;
323
324	if( !frameData.orthoRhombic )
325	scaled = frameData.invHmat * pos;
326	else {
327	// calc the scaled coordinates.
328	for (int i=0; i<3; i++)
329	scaled[i] = pos[i] * frameData.invHmat(i, i);
330	}
331
332	return scaled;
333	}
334
335	void Snapshot::setCOM(const Vector3d& com) {
336	frameData.COM = com;
337	hasCOM = true;
338	}
339
340	void Snapshot::setCOMvel(const Vector3d& comVel) {
341	frameData.COMvel = comVel;
342	hasCOMvel = true;
343	}
344
345	void Snapshot::setCOMw(const Vector3d& comw) {
346	frameData.COMw = comw;
347	hasCOMw = true;
348	}
349
350	Vector3d Snapshot::getCOM() {
351	return frameData.COM;
352	}
353
354	Vector3d Snapshot::getCOMvel() {
355	return frameData.COMvel;
356	}
357
358	Vector3d Snapshot::getCOMw() {
359	return frameData.COMw;
360	}
361
362	RealType Snapshot::getTime() {
363	return frameData.currentTime;
364	}
365
366	void Snapshot::increaseTime(RealType dt) {
367	setTime(getTime() + dt);
368	}
369
370	void Snapshot::setTime(RealType time) {
371	frameData.currentTime = time;
372	}
373
374	void Snapshot::setBondPotential(RealType bp) {
375	frameData.bondPotential = bp;
376	}
377
378	void Snapshot::setBendPotential(RealType bp) {
379	frameData.bendPotential = bp;
380	}
381
382	void Snapshot::setTorsionPotential(RealType tp) {
383	frameData.torsionPotential = tp;
384	}
385
386	void Snapshot::setInversionPotential(RealType ip) {
387	frameData.inversionPotential = ip;
388	}
389
390
391	RealType Snapshot::getBondPotential() {
392	return frameData.bondPotential;
393	}
394	RealType Snapshot::getBendPotential() {
395	return frameData.bendPotential;
396	}
397	RealType Snapshot::getTorsionPotential() {
398	return frameData.torsionPotential;
399	}
400	RealType Snapshot::getInversionPotential() {
401	return frameData.inversionPotential;
402	}
403
404	RealType Snapshot::getShortRangePotential() {
405	if (!hasShortRangePotential) {
406	frameData.shortRangePotential = frameData.bondPotential;
407	frameData.shortRangePotential += frameData.bendPotential;
408	frameData.shortRangePotential += frameData.torsionPotential;
409	frameData.shortRangePotential += frameData.inversionPotential;
410	hasShortRangePotential = true;
411	}
412	return frameData.shortRangePotential;
413	}
414
415	void Snapshot::setLongRangePotential(potVec lrPot) {
416	frameData.lrPotentials = lrPot;
417	}
418
419	RealType Snapshot::getLongRangePotential() {
420	if (!hasLongRangePotential) {
421	for (int i = 0; i < N_INTERACTION_FAMILIES; i++) {
422	frameData.longRangePotential += frameData.lrPotentials[i];
423	}
424	hasLongRangePotential = true;
425	}
426	return frameData.longRangePotential;
427	}
428
429	potVec Snapshot::getLongRangePotentials() {
430	return frameData.lrPotentials;
431	}
432
433	RealType Snapshot::getPotentialEnergy() {
434	if (!hasPotentialEnergy) {
435	frameData.potentialEnergy = this->getLongRangePotential();
436	frameData.potentialEnergy += this->getShortRangePotential();
437	hasPotentialEnergy = true;
438	}
439	return frameData.potentialEnergy;
440	}
441
442	void Snapshot::setExcludedPotentials(potVec exPot) {
443	frameData.excludedPotentials = exPot;
444	}
445
446	potVec Snapshot::getExcludedPotentials() {
447	return frameData.excludedPotentials;
448	}
449
450	void Snapshot::setRestraintPotential(RealType rp) {
451	frameData.restraintPotential = rp;
452	}
453
454	RealType Snapshot::getRestraintPotential() {
455	return frameData.restraintPotential;
456	}
457
458	void Snapshot::setRawPotential(RealType rp) {
459	frameData.rawPotential = rp;
460	}
461
462	RealType Snapshot::getRawPotential() {
463	return frameData.rawPotential;
464	}
465
466	RealType Snapshot::getTranslationalKineticEnergy() {
467	return frameData.translationalKinetic;
468	}
469
470	RealType Snapshot::getRotationalKineticEnergy() {
471	return frameData.rotationalKinetic;
472	}
473
474	RealType Snapshot::getKineticEnergy() {
475	return frameData.kineticEnergy;
476	}
477
478	void Snapshot::setTranslationalKineticEnergy(RealType tke) {
479	hasTranslationalKineticEnergy = true;
480	frameData.translationalKinetic = tke;
481	}
482
483	void Snapshot::setRotationalKineticEnergy(RealType rke) {
484	hasRotationalKineticEnergy = true;
485	frameData.rotationalKinetic = rke;
486	}
487
488	void Snapshot::setKineticEnergy(RealType ke) {
489	hasKineticEnergy = true;
490	frameData.kineticEnergy = ke;
491	}
492
493	RealType Snapshot::getTotalEnergy() {
494	return frameData.totalEnergy;
495	}
496
497	void Snapshot::setTotalEnergy(RealType te) {
498	hasTotalEnergy = true;
499	frameData.totalEnergy = te;
500	}
501
502	RealType Snapshot::getConservedQuantity() {
503	return frameData.conservedQuantity;
504	}
505
506	void Snapshot::setConservedQuantity(RealType cq) {
507	hasConservedQuantity = true;
508	frameData.conservedQuantity = cq;
509	}
510
511	RealType Snapshot::getTemperature() {
512	return frameData.temperature;
513	}
514
515	void Snapshot::setTemperature(RealType temp) {
516	hasTemperature = true;
517	frameData.temperature = temp;
518	}
519
520	RealType Snapshot::getElectronicTemperature() {
521	return frameData.electronicTemperature;
522	}
523
524	void Snapshot::setElectronicTemperature(RealType eTemp) {
525	hasElectronicTemperature = true;
526	frameData.electronicTemperature = eTemp;
527	}
528
529	RealType Snapshot::getPressure() {
530	return frameData.pressure;
531	}
532
533	void Snapshot::setPressure(RealType pressure) {
534	hasPressure = true;
535	frameData.pressure = pressure;
536	}
537
538	Mat3x3d Snapshot::getPressureTensor() {
539	return frameData.pressureTensor;
540	}
541
542
543	void Snapshot::setPressureTensor(const Mat3x3d& pressureTensor) {
544	hasPressureTensor = true;
545	frameData.pressureTensor = pressureTensor;
546	}
547
548	void Snapshot::setStressTensor(const Mat3x3d& stressTensor) {
549	frameData.stressTensor = stressTensor;
550	}
551
552	Mat3x3d Snapshot::getStressTensor() {
553	return frameData.stressTensor;
554	}
555
556	void Snapshot::setConductiveHeatFlux(const Vector3d& chf) {
557	frameData.conductiveHeatFlux = chf;
558	}
559
560	Vector3d Snapshot::getConductiveHeatFlux() {
561	return frameData.conductiveHeatFlux;
562	}
563
564	Vector3d Snapshot::getConvectiveHeatFlux() {
565	return frameData.convectiveHeatFlux;
566	}
567
568	void Snapshot::setConvectiveHeatFlux(const Vector3d& chf) {
569	hasConvectiveHeatFlux = true;
570	frameData.convectiveHeatFlux = chf;
571	}
572
573	Vector3d Snapshot::getHeatFlux() {
574	// BE CAREFUL WITH UNITS
575	return getConductiveHeatFlux() + getConvectiveHeatFlux();
576	}
577
578	Vector3d Snapshot::getSystemDipole() {
579	return frameData.systemDipole;
580	}
581
582	void Snapshot::setSystemDipole(const Vector3d& bd) {
583	hasSystemDipole = true;
584	frameData.systemDipole = bd;
585	}
586
587	void Snapshot::setThermostat(const pair<RealType, RealType>& thermostat) {
588	frameData.thermostat = thermostat;
589	}
590
591	pair<RealType, RealType> Snapshot::getThermostat() {
592	return frameData.thermostat;
593	}
594
595	void Snapshot::setElectronicThermostat(const pair<RealType, RealType>& eTherm) {
596	frameData.electronicThermostat = eTherm;
597	}
598
599	pair<RealType, RealType> Snapshot::getElectronicThermostat() {
600	return frameData.electronicThermostat;
601	}
602
603	void Snapshot::setBarostat(const Mat3x3d& barostat) {
604	frameData.barostat = barostat;
605	}
606
607	Mat3x3d Snapshot::getBarostat() {
608	return frameData.barostat;
609	}
610
611	void Snapshot::setInertiaTensor(const Mat3x3d& inertiaTensor) {
612	frameData.inertiaTensor = inertiaTensor;
613	hasInertiaTensor = true;
614	}
615
616	Mat3x3d Snapshot::getInertiaTensor() {
617	return frameData.inertiaTensor;
618	}
619
620	void Snapshot::setGyrationalVolume(const RealType gyrationalVolume) {
621	frameData.gyrationalVolume = gyrationalVolume;
622	hasGyrationalVolume = true;
623	}
624
625	RealType Snapshot::getGyrationalVolume() {
626	return frameData.gyrationalVolume;
627	}
628
629	void Snapshot::setHullVolume(const RealType hullVolume) {
630	frameData.hullVolume = hullVolume;
631	hasHullVolume = true;
632	}
633
634	RealType Snapshot::getHullVolume() {
635	return frameData.hullVolume;
636	}
637
638	void Snapshot::setOrthoTolerance(RealType ot) {
639	orthoTolerance_ = ot;
640	}
641	}