work on molecular cutoffs
useMolecularCutoffs added to Globals
add center of mass of the molecule and massRation into atom class
modified the defaults for the system init time and system init state.
finished removing the trajectory analysis. took out the rattle derivation. added a section concerning the creation of init files. currently working on a table of key words for the package.
Fixed a bug in calc_charge_charge.F90
add reaction field correction to charge-charge interaction
change the calculation of pressure tensor
fixed another bug in InitFromFile. MPI verion of OOPSE is working again
fixed two bugs in MPI version of InitfromFile and one unmatch MPI command in DumpWriter
remove some useless files
fixed getCOMVel and velocitize at thermo
DUMP2XYZ 0.99 version
Fixed a charge bug
forgot to add this
fixed the makefile, and fixed some visuals on the schemes
finished cleaning up the old tex files
Just copied over the changes from the dissertation. Also converted the figures to pdf. All revisions now take place on the oopsePaper.tex file
fixed a bug in CompositeVisitor which cause the double counting problem
Dump2XYZ is almost working except atoms in rigidbody are double counted
new implement of quickLate using visitor and composite pattern
final final copy. really really sent to the printers this time.
fix a bug in setting exclude list
final copies sent to the printer
updated all equations, and finished all requested revisions
fix whole bunch of bugs :-)
some more updates.
revised the diffusion numbers.
Added the WATER.frc force field
fixed for get_potential
Change DumpWriter and InitFromFile
some more minor fixes
returned the referencess to the thesis layout, and fixed the equation grammer in the Introduction
started on some revisions
Now molecules can keep track of their own IntegrableObjects (and RigidBodies). Also a bug-fix so that SimInfo can keep track of RigidBodies (which was done incorrectly before).
Added Integrable (will back out momentarily)
Oops. Those were old.
Forgot to add IntegrableObjects
Adding RigidBody code
Changes for RigidBody dynamics
Slightly longer test run
Changes for RigidBody dynamics (Somewhat extensive)
added a makefile
more gcc friendly configure script who knows
more gcc friendly configure script
incorporate SMD into ZConstraint,it does not sound a good choice, next commit will seperate SMD and ZConstraint
added lst styles, and some preliminary fixes to the intro.
ZConstraint now can support sequential moving. Refactorying is needed to support SMD in ZConstraint
final draft submitted to the readers.
final draft submitted to the readers.
added revisions to the Preamble and to the Introduction
semi-final draft
added support for files larger than 2 Gb
who knows?, but it works for the most part
making progress on the results section
added several figures to the lipid paper, changed the ndthesis class around a little. some small fixes in oopse.
NPTf complete, NPTxyz complete
NPTi complete
added gofz code
NPT work in progress
add LARGEFILE_SOURCE64 macro to support large file
More DLM changes
more changes for integrators
Fix a couple of bugs in zsub
Adding zsub, a program which can be used to replace atom type for zconstraint into OOPSE
finished the rmsd coding. hasn't been debugged
started work on rmsd
added citations to the bib, and started on a honking huge section of RATTLE in the oopse chapter.
switched params for tcR systems
Work on integrators
halfway through revisions in OOPSE
worked out the diagonalization bugs in head and whole
*** empty log message ***
remove the old implement of minimizer from cvs tree
Using inherit instead of compose to implement Minimizer both versions are working
added discussion of multiple image periodic boundry conditions, and added a figure to match the discussion
debugging the director code
cleaned up the references and the tables in the lipid section. also spell checked the thing.
added scd correlations, and director and order parameters for the head groups
made a makefile
finished up the rough draft of tcProps with Scd corr
adding function shakeF in order to remove the constraint force along bond direction
lmost finished with the readWrite routines
finished most of the actual dump scane.
started some cleanup on oopse. added a conclusion, finished the foreword, and found all the undefined citations
added a little bit more to readWrite.c
started on som io
added an introduction to oopse, and started smoothing out the wrinkles.
little changes in the twoChain figure
started work on some parameters and initialization
This commit was generated by cvs2svn to compensate for changes in r1047, which included commits to RCS files with non-trunk default branches.
single version of energy minimization is working.
added a lipid figure. started converting oopse.tex
added some OOPSE sections
started a bug fix on the massive memory overusage by OOPSE
added some revisions to the intro
Stripped out the hardwired LJ_rcut
Fixed some typos
*** empty log message ***
added a degeneracy figure
added a new euler fig, and fixed some things in the degeneractyy section
final version
Single version of energy minimization for argon is working, need to add constraint
Figure added
I hate revtex
Add one more file into Makefile.in
Add some lines into global.cpp to make it work with energy minimization
Now enthalpies of formation
Changes in response to JCP reviewer
Added black and white version's of figures
More corrections and fixing of experimental numbers
typed up the lipid section
Fixed a reference
Ran iSpell
Fix a bunch of bugs :-) Single version of conjugate gradient with golden search linesearch pass a couple of functions test. Brent's algorithm is still broken
More discussion of the orientational results as well as a description of the experimental tau_2 calculation.
started work on the complete project. Made a makefile, and added preambles
little changes, added the start of the conclusion.
Further improvements. Discussion of the results in the table was added.
fixed .bib file problems
Adjustments made based on reviewer recommendations. These include an expansion of diffusion data as well as inclusion of a table containing heat capacity, coordination number, and orientational relaxation information.
added in the RSA paper to the dissertation
NLModel0, NLModel1 pass uit test
little fixes
added the new figure into the Introduction
finished putting equations in Introduction added an euler rotation scheme picture
*** empty log message ***
to avoid cyclic depency, refactory constraint class
added some equations
ran spellcheck
Functor.hpp pass unit test
added a shifted potential figure
begin unit test of minimizer
updated the two figures in the introduction
added some figures to the Intro. Also lots of equations
Adding GoldenSection and Brent LineSearch Method
finished typing in the intro, and started on the lipid chapter
using class Minimizer1D derived from MinimizerBase instead of a functor to do line seach
Substantial changes. OOPSE now has a working WATER.cpp forcefield and parser. This involved changes to WATER.cpp and ForceFields amoung other files. One important note: a hardwiring of LJ_rcut was made in calc_LJ_FF.F90. This will be removed on the next commit...
member list fixes for rigid bodies
Adding MinimizerParameterSet class.
Revision of NLModel0 and NLModel1
revision of NLModel
Added point-charge models to water.mdl file, updated ssd.bass to use new SSD name
Fix to new RigidBody stuff
Longer run time to test SSD water in MPI
Longer run time to test gold in MPI
Longer run time to test argon
More BASS changes to do new rigidBody scheme a copy of WATER.cpp from this morning
More BASS changes to do new rigidBody scheme
revision of constraint for Nonlinear Optimization Model
Changes to BASS reader to use Euler angles for orientation instead of unit vectors required changes in MoLocator
Changed orientation lines from unit vectors to euler angles
Convert Eulers in degrees into radians
Changed default orientation in BASS to use Euler angles in the following order: phi, theta, psi Removed the ability to set orientation using a unit vector
Changed default orientation in BASS to use Euler angles in the following order: phi, theta, psi Removed the ability to set orientation using a unit vector
Fix broken atom assignment for rigid bodies
added in the last bit about symplectic integrators and the liouville formulation
a few corrections to the introduction
added changes to the introduction
started adding in equations to the introduction
Corrected spelling in several directories, and stated WATER.cpp
constraint class in energy minimization
added periodic boundry conditions citation
minor corrections to the previous commit
added changes into the Empirical Energy section
started work on the lipid chapter
Adding energy minimization
Energy Minimizer
*** empty log message ***
Corrected .bib file entries
ran spell check, and fixed some little typos
Made some error messages more user-friendly
worked listing schemes into the document
Updated the default water to SSD/E
Adding warning if sample time, status time, thermal time and reset time are not divisible by dt
Adjusted the SSD part of the paper...
Added a bunch of dummy targets so make won't complain
Fixed old bass file
BASS changes to add RigidBodies required a change in how the MoleculeStamps are used by divideLabor in mpiSimulation.cpp
BASS changes to add RigidBodies and LJrcut
added in changes to the Monte carlo andMolecular dynamics section
adding the monte carlo section to the intro
forgt to add these earlier
did some work, started on the introduction chapter
fix a bug in creating eor file
fixed a bug where only MPI jobs could write eor files
fixed an struct mismatch error in the mpi initialization of the AtomStruct
Fixes for Dumps
Changes for altivec
Documented the Spud Toss
changes for charge charge interactions
More work for adding charges
autoconf fixes
fixed a periodic box bug
autoconf compatibility changes for icc8
Changes for adding direct charge-charge interactions (with switching function)
Some changes for new MPI organization and direct charge-charge interactions
*** empty log message ***
Energy Minimization method
fixed some things in the periodic image part
open and close the eor file whenever it is used instead of rewinding it
Made changes to the rigid body stuff...
change the interface of writeFrame
more changes to eam section.
More typo fixes.
Changed section on eam.
added new revisions
Merge the code of writeFinal and writeDump; Adding sortingIndex into DumpWriter; Fix a bug of writing last frame twice in integrator
revision
fix a bug in copying string
Dumpwriter only write out the atoms on master nodes
Updated the rigid body and ssd sections
added the cover letters
removed extra files
remove extra files
Edits for publication
tagub is not a bug. Just roll it back fix a bug of copying string to a pointer Still have Seg fault, it looks like a random MPI seg fault in totalview
Fix a bug of declaration of tagub
rotated the lipid figure added eam to the Emperical Energy
Added daw entry.
New DumpWriter (Attempt #4)
added a lennard jones section to the Emperical Energy section
added some work on the Introduction chapter
A work in progress...
null terminate some strings just in case
refixed the NVT readin XS state bug.
added strncpy to DumpWriter
fixed the restart from NVT exstended state bug
Added rigid body discussion and added to .bib file...
First Stab at fixing DumpWriter
added support for the ignore XS state info flag
Fixed a bug of sending message from master node to itself in DumpWriter.cpp and InitializeFromFile.cpp
*** empty log message ***
Periodic Boundary Conditions
started adding some changes from before break
performance fixes in the dipole dipole and reaction field code
Making do_Forces a little more sane
reworked the directory structure to reflect the Outline of the paper. All major sections now have their own tex file
Attempting to increase performance by reducing spurious function calls
mangling forces even further
mpich mucking
mangled do_forces...
Added bitmask to do_forces property lookup
Added third-party directory for code not written by us. Also added Mersenne Twister random number generator code. This will eventually replace sprng as the random number generator used by OOPSE.
Fixes to profile code.
More profiling fixes.
Another change for MPI in timing.
Small update to timing in MPI
the profiling commands work now. Will start adding PROFILE ifdefs into the code
added some profiling routines
working on adding GofRtheta and GofRomega additional work on randomBilayer
working on adding GofRtheta and GofRomega
added some profile functionality
Added functions for simple profiling in fortran.
Fixed bug in parallel EAM. rho_row and rho_col were scattered into the same array. Unfortunately, MPI zeros the array between scatters so half of the sum was being lost. Fixed by added a temp array for column scatter, then sum loop over nlocal.
Adding missing figures....
test commit...
finished gofRtheta and added gofRomega. both need to be debugged and tested.
Changes for gradients (to do minimizations)
removed the randombilayer header
edited the makefile to add randomBilayer to the build. Also move the random bilayer builder from bilayerSys to randomBilayer
backed up the old DUFF.frc to backup.DUFF.frc alte4red masses and epsilons of TB2 and TB3 in DUFF.frc
added a more verbose error message in SimInfo. Added a more informative error message in InitializeFromFile
begun work on add ing in the GofR,CosTheta
Fixed a bug in SimInfo ordering of radii
D'oh, more color plots...
Again, more color plots...
Added color denseSSD plot
Fixes for rotation
Learned to use cvs add and cvs remove...
Really added color figures.
Made color figures!
Added Vectors
Changed ice 0 to ice i.
Considerable corrections to both text and figures from the previous commit. Now in the true pre-print form. This is the updated first draft.
Massive changes to content. Declared as first draft.
added a routine to SimInfo.cpp to inline a min function.
reordered the rcut/ecr/boxSize initialization removed the rcut/ecr shrink and grow algorithm. the simulation will now exit when it runs into rcut or ecr.
Added support for compiling fortran without use of mpich modules. We use mpif.h instead.:
moved the velocity scale matrix calculation outside of the atom loop in the NPT family of integrators.
Fixed plots by including SSD1 data. Made several images more condensed and easier to read. Begun altering text to match the new focus.
added the following parameters to BASS: * useInitialExtendedSystemState * orthoBoxTolerance * useIntiTime => useInitialTime
fixed the includes in the Make.dep
did a merge by hand from the new-templateless branch to the main trunk.
bug Fixes include:
* fixed the switching function from ortho to non-ortho box.
!!!!! THis was responsible for all of the sudden deaths we saw.
* some formating in the string when we write out the extended system state.
* added NPT.cpp to the makefile.in
some work on trying to find the compression bug
added template stuff to the Maikefile template little changes to some printf format statements
added template stuff to the Maikefile template
bug fixes for rList problems
Fixed bug that size(q0) was being queried before q0 was allocated.
fixed a stdlib.h include error in bass.l fixed a little bug in the first time step, regarding the setting of ecr and est in fortran
fixed a stdlib.h include error
som efixes to the way rcut is setup, as well as additional debugging comments.
C++ compatibility for templates
Refixed broken makefile
compatibility fixes
add chi and eta to the comment line of dump file.
did a complete overhaul of how c calls fortran. All function pointers and fortran calls are rigidly typecast now.
Portability fixes
Compatibility fixes
started trying to understand extern "C" stuff for pointers
fixes for compatibility
replace c++ header stuff with more portable c header stuff Also, mod file fixes and portability changes Some fortran changes will need to be reversed.
replace c++ header stuff with more portable c header stuff Also, mod file fixes and portability changes
mod file fixes and portability stuff
Stuff for MOD support in other compilers
added routines for the sysbuilder to work with simSetup remved the QuickBass routines, and had all parsing go through SimSetup. LatticeBilayer is in complete working order now.
added routines for the sysbuilder to work with simSetup
fixes for configure, sysBuild
put QuickBass, MoLocator, and latticeBuilder into a Builder Library overhauled latticeBilayer into its own program. Removed sysBuild from the Makefile
Started work on integrator stuff
New File
Formatting changes to get out of RevTex nonsense
work on bilayer builder
fixed a merge problem
added eam ForceField files to the init fixed an eam mpi parmeter setup bug added the init file to the makefile
added eam ForceField files to the init fixed an eam mpi parmeter setup bug
added eam ForceField files to the init
added a new NPT integrator, NPTxyz. It scales the x, y, and z direction sepeartely. no box skew allowed.
added useInitTime to the BASS syntax. * useInitTime = false: sets the origin time to 0.0 regardless of the time stamp in the .init file * default=> useInitTime = true;
added the staticProps directory to the build list for both configure and configure.in fixed a number of bugs in the staticProps code. gofr is now working.
added the staticProps directory to the build list for both configure and configure.in
added the staticProps directory to the build list
Fixed a plot (fullContours.eps had bad labels).
dded my handwritten pages from 10-16-03
changed format to preprint article
Changed DumpReader to use linked lists instead of a vector. Fixed the makefile to build DumpReader.cpp Removed a comment output in Exclude.cpp Modified DumpWriter and Integrator to write an eor file every time a frame is written. This lets the .eor file represent the last written frame of a simulation.
removed the props directory, and moved everything over to staticProps
Contiuned work on staticProps. should be in a position where it will compile and run first runs.
Fixed bug in calc_eam.
added Au init file for eam.
removed entahlpy from the statwriter and thermo.
changed the formating ogf the error statements in simError added a function to get the maxCutoff near completion of the staticProps code. still needs the pair loop, and the loop to allocate and read each frame.
changed the formating ogf the error statements in simError added a function to get the maxCutoff
changed the formating ogf the error statements in simError
finishing up the constructs needed to get this program up and running
changed f90Flags so they are no longer overwritten by the compiler.
added mpif90 mod check back same for conifig.in fixed wrappers to extern "C"
added mpif90 mod check back same for conifig.in
added mpif90 mod check back
fixed a lot of warnings and errors found with SUN's SUNWspro.s1s7
light change in syntax. no signifigant change.
fixed some additional remarks from icc -w3 (extra verbose output)
cleaned things with gcc -Wall and g++ -Wall
fixed a bug in configure
fixes for configure
moved readyCheck in the integrator so that it is called before the first Statistics are written.
Added a bunch of Make.dep files to CVS
Removed NPTfm from Integrator.hpp. Some small syntax cleaning in NPTfm and SimSetup
fix bug in calculating maxCutoff
Converted NPTf to work with the NPT base class. Removed NPTfm and NPTim from cvs
Added zcons.tex
added NPT base class. NPTi is up to date. NPTf is not.
I must have changed something, but for the life of me I can't recall it...
Just added to the make file...
Added the integrator.tex file with figure. This is the same as the ssdePaper, so it needs to be adjusted for the OOPSE paper. Also updated the oopse.bib file.
removed mpi++ from the makefile
goofing off to test NPTf and NPTi
fixed bugs in NPTf, found (nearly) conserved quantities for both NPTi and NPTf
fixed a typo in the makefile.
*** empty log message ***
*** empty log message ***
fixed NPTi to now work with constraints.
fixed ecr grow in SimInfo fixed conserved quantity in NPT (Still some small bug) NPTi appears very stable.
made additions to lipidIntro
SSD portion of paper added (ssd.tex).
added an intro to the lipid part
add conserved quantity to statWriter fix bug of vector wrapping at NPTi
added AllCorr. It eill still need some work
Added integrators to Makefile.in
Entered changes for configure into ChangeLog
Adjustments to the introduction. Minor additions to the methods section. Chris
added more work on getting gofR working.
First CVS commit. Minor changes in the introduction. More changes to follow... Chris
added the beginings of the GofR pair correlation. added identification of identI in matchI.
updated the ChangeLog added two new NPT integrators, they still need work.
updated the ChangeLog
a rough draft of the intial simulations
*** empty log message ***
Added parallel section of paper.
dependency on config.h
fixed sprng problem
New Makefile for metals sample
Changes to autoconf / configure method of configuring OOPSE
added resetTime to the Global namespace. added ability to reset the integrators in the NVT and NPT family.
added resetTime to the Global namespace.
Removed big file
This is the paper that got scooped
added zConstraint types to the AtomTypes file. added two rendering scripts to to aid in rendering. Note:renderRange does not work.
added zConstraint types to the AtomTypes file.
added a charmm citation to the bib file. finished adding all of the equations into DUFF.
added my J. Peter Grace fellowship.
fix a bug at MPI version of PolicyByMass
added some text to DUFF, changed the preamble from two column to preprint format.
Added: check uniqueness of molIndex
added the first functional parts of the PairCorrType Abstract classes.
put in some writing on initialSimulations
fix bug of MPI_Allreduce in ZConstraint, the MPITYPE is set to MPI_DOUBLE, however, the corret type is MPI_INT. Therefore, when we turn on the optimization flag, it causes a seg fault
added the disertaion bibliography got the directory setup to build standalone texts.
added the disertaion bibliography
More fixes for stress tensor parallel bug.
This commit was generated by cvs2svn to compensate for changes in r728, which included commits to RCS files with non-trunk default branches.
fix bug in calc_dipole_dipole.F90 and calc_stikcy_pair.F90 molMembershipList use global index instead of local index
set default force substraction policy to PolicyByMass
*** empty log message ***
added define statemewnt to Statwriter and Dumpwriter to handle files larger than 2 gb. commented out some print statements in Zconstraint hard coding some system init into bilayer.sys
added define statemewnt to Statwriter and Dumpwriter to handle files larger than 2 gb. commented out some print statements in Zconstraint
Use make_sprng_seed() to generate seed and check the seed which is specified by user at least contains 9 digits
changed the Makefiel a litle. Fixed a bug in MPI_DUFF. The atom block type was not being properly constucted in MPI. (The MPI struct had 6 doubles declared versus the actual 11)
changed the Makefiel a litle.
More FreeBSD fixes
*** empty log message ***
did some more work on DUFF.
added the lipid figure, and did some work on DUFF.
little changes to finish the port from make current to currMake
overhauled the makefile to build oopse.tex from the infiles rather than mess with includes. Also renamed header and footer to preamble and bibEnd respectively. make current has been replaced with currMake to tke a look at a single tex section.
added some work to DUFF
added a currMake script to replace the make current
small bug fix on frequency of output dumps.
played a little with the headers in DUFF
made some changes.
user can setup seed in bass file now, if he does not specify any value for seed, oopse will take the value of seconds of system time as seed
updated the Changelog. added some bug fixes for setting the random number generator seed value. fixed a bug where ghostbend atom b was not being set. ( recent bug from SimState conversion)
updated the Changelog. added some bug fixes for setting the random number generator seed value.
updated the Changelog.
bug fixed in ghost bend class
quick makefile fix, in make links. added -f to ln -s.
*** empty log message ***
reformmating ZConstraint and fixe bug of error msg printing
Fixed sysBuild -bilayer works. Nanobuilder still broke.
Tested MPI version of Z-Constraint Method
started working on DUFF
finished a rough draft of the dynamicProps section. added calculation sheme to the staticProps
Stable ZConstraint with average force substraction strategy
added text to the analysis code.
Added some profiling code -DPROFILE.
harmonic potential & z-contraint method
*** empty log message ***
trying to debug eqn references
fixed a really annoying bug in Directional Atom, where mu was getting written to pseudorandom memory location.
debugging globals
formatting fixes and new atypes in LJFF
fixed a few references to older stuff...
Added comment line for getgetopt.
Missed del of files before.
*** empty log message ***
commit makefile
added harmonical potential to z-constraint method
changed how the comment line is handled to allow greater flexibility.
Changed makefile to only build quicklate.
added utils/sysbuilder to be built.
Arranged sysbuilder into a subdirectory. Fixed some of sysbuilder to work with new atom allocation in libmdtools.
added method of moving zconstraint molecules to specified positions
*** empty log message ***
Added zConstraint into the BASS language syntax.
changed the number of degrees of freedom to account for zConstreints
EAM works...... Neighbor list also works.....
moved frameCount's functionality into DumpReader. also split props into staticProps and dynamicProps. (currently only have staticProps)
fixed a deprcated instance of Atom::setZ and Atom::getZ in ZConstaint.
switched SimInfo to use a system configuration from SimState rather than arrays from Atom
Bug fixes for eam...
added the main equations to the analysis section
*** empty log message ***
edited the header to be a revtex style two column layout.
*** empty log message ***
added a current.tex to allow for looking at your current work, just change the include to the current tex file also seperated all header info into header.tex so that oopse.tex and current.tex will behave the same.
This commit was generated by cvs2svn to compensate for changes in r662, which included commits to RCS files with non-trunk default branches.
stable version of Z-Constraint
add index range checking into ZConstraint
added z-constraint parameters to the globals
Added Z constraint.
More bug fixes for eam.
working on the props code
*** empty log message ***
Added bass models for metals
Added eam to simSetup and added changecutoffeam.
Changed configure to look for both upper and lower cass .mod files
rewrote the makefiles a little to install two scripts for rendering
module use fixes for eam and do_forces.
added a '-' to the formating of the pov output file. also removed pov2anim from the project. It will be replaced with shell scripts
Finished most code for eam....
added the scan function to the DumpReader. It should now save the start of each frame in a vector.
making some changes to read dump files
*** empty log message ***
Fixed a current time initialization bug in InitFromFile.
some initial changes to Dumpwriter and friends to accomadate random file access
Initialized currentTime to 0, in case no one sets it.
fixed Initializefrom file to start the simulation from the time specified in the init file.
reoved some binary files
added DUFF lipid models to the AtomTypes file
fixed the AtomType file not found bug.
Started work on a DumpReader
Fixes for SSD/E
Changes for SSD/E
commented out an eam line
fixed spelling issue
added info module
Added massive changes for eam....
final fixes
Fixed a the centering on the Periodic Box. Also corrected the y and z switch in the box vectors
*** empty log message ***
More up to date version of EAM_FF
Changed how cutoffs were handled from C. Now notifyCutoffs in Fortran notifies those who need the information of any changes to cutoffs.
Started work on Hmat stuff to replace box Lengths
Made quickLate aware of Hmat. quickLate is now somewhat more intelligent about periodic boundaries and wrapping.
Fixed bug in updating mixing lists
added a quick wipe-and-update script for quick rebuilds on BoB
more fixes for box changes
removed some debugging print statements.
fixed a long lived bug in do_forces. Rrf was not being used in the neighborlist correctly. rcut was conssistently being set lowere than Rrf causing the dipole cutoff region to be to small. Also led to the removal of the taper region to buffer the dipole cutoff.
working on fixing ssd bug
Fixes for the NPT ensembles
cleaned up simSetup
added KMol
fixed some bugs, Changed entry_plug to info where appropriate
added more command line arguments
Fixing force field line
Fixing pressure tensor
more archaic code fixes
removed old outdated code
fixes to get rid of get_vx and set_vx
removing get_vx
Added NPTfm
Bugfix in NPTim, fixes for NPTfm
Checking in changes for NPTim
Broken SysBuilder
Fixes for samples
Removed some debugging write statements
Fixes for get and set routines in Atom and DirectionalAtom
added get and set routines to Atom and DirectionalAtom
added a nanoSysBuilder that takes different cmd line arguments.
found a bug. Unit vectors were not being updated
Working on NPTim
Switched the bond in the force field back to constrained, to preserve energy
working on som integrator bugs
Starting to worry about all the strtok() calls in our code
Fixed Hmat and some namespace strangeness
Fixed hmat in DumpWriter (MPI) and eor.
fixed some bugs
Added nanoBuilder and a general Lattice builder.
Bunch of 1-d array -> 2-d array stuff
*** empty log message ***
Bug fixing NPTi and NPTf. there is some error in the caclulation of HmatInverse.
*** empty log message ***
*** empty log message ***
starting some work for xlate
adding in dan's NPT stuff
This is the dp and read file
Fixes and merging NPTf
Removed Qmass
Fixes for both NPTf and NPTi
Fixes in NPTi migrated into NPTf
*** empty log message ***
fixed box scaling
NPTi
cleaned up the dependecy scripts in the makefiles
fixed the bugs introduced by switching the periodic box to a matrix
Fortran flexi-BOX
Fixes for flexi-BOX
working on adding the box matrix to everything.
Updated the ChangeLog, and Converted most of the SImInfo to use non-Isotropic boxes. wrapVector needs to be finished.
Changed over the bonds to Harmonic bonds in the DUFF frc file fixed constraints.
Changed over the bonds to Harmonic bonds in the DUFF frc file
Fixes to NVT. Check them!
added Harmonic bod into the DUFF forcefield and BondExtensions.cpp
Doing some work to debug the constraint code.
NPT fix
Most of the integrator and NVT seem to be working now.
NVT additions
slowly converting to new integrator and forcefield names.
finished the basics of the integrator and SimSetup.cpp
doing some work on SimSetup to clean it up / get it to work with the new Integrator.
minor changes in an attempt to fix output times.
Added Teng's parmeters fro the ghost Bend in TraPPE_Ex some work on the integrator. ( incomplete)
Added Teng's parmeters fro the ghost Bend in TraPPE_Ex
mostly final version
First completed rough draft (spell checked even).
fixed the left alignment bug. Bugger if I know what was causing it.
about halfway there.
nothing major just some little changes here and there.
added constrainA and constrainB to the Symplectic integrator
updated the logo a little as well as some of the colors
starting to add in the stuff for the poster.
This commit was generated by cvs2svn to compensate for changes in r544, which included commits to RCS files with non-trunk default branches.
currently modifiying Symplectic to become the basic integrator. bilayerSys.cpp altered for building tb3.
currently modifiying Symplectic to become the basic integrator.
added some member variables for position, velocity, etc.
changed how NVT is now derived from Integrator
fixed an a mismatched Ghostbend bug.
all seems to be working
still working on the bilayer code
doing some work to overhaul sysbuild.
optimized the ssd calc loop
Added bead lipid model to the sample directory
finished adding the Tail beads into the Trappe extended force field
added the TailBead atom types to the TraPPe_Ex forceField
fixed up the TraPPE_Ex force field. there were some duplicate entries added a two chain lipid to the lipid.mdl in sample
fixed up the TraPPE_Ex force field. there were some duplicate entries
added the utils subdirectory to the configure script added the CH branching group to the TraPPE_Ex fource field
added the utils subdirectory to the configure script
I added the calcPi.c
calculation of the pi
added optimization to the compile
We update the Makefile.
we have succesfully debugged the program. it is ready for use in any application we want.
fleshed out all of the ideas we wanted to see in this interface. it is still not yet debugged.
started some initial rewrite for the template.
Added binary extensions
changed the name of madProps.c to commandLine.c
This commit was generated by cvs2svn to compensate for changes in r516, which included commits to RCS files with non-trunk default branches.
updated xyz2pov to put out better pov scripts. I'm begining to think pov2anim isn't as useful. not sure if I should up date it, or just leave the rendering steps to shell scripts.
Added a quick readme, and Identified myself as the author
this should be the last of the random crap to toss out.
killing some files
killing misc . crap that shouldn't be inb the source tree. cleanning up the makefiles
killing misc . crap that shouldn't be inb the source tree.
Rearranged the source tree to be easier to distribute. Added autoconf and automatic dependency generation
added some stuff, and forgot to update. who knows whats different now.
added all the files
i quick fix to th distance in the random bilayer builder
added a new test for constraint failure
fixed up sysBuild to where it should now build our systems
almost finished.
bilayerSys and sysBuild both will build now. woot!
finished bilayerSys.cpp sysBuild still need to write the bass file. MoLocator.cpp is currently empty
Added eam force files...
More eam work.
working on the system builder
Fixed ordering on NVT calculation in integrators.
working on a system builder
added Ghost bends to the TraPPE_Ex forceField added sysBuild to the utils Makefile
added Ghost bends to the TraPPE_Ex forceField
Added first mangling of EAM.
fixed a memory bug in Fortran, where molMembershipArray was declared nLocal instead of nGlobal.
Bug fix in progress for NPT
added a globalIndex counter to Molecule
Working on ConstantStress
fixed a n mpi init bug in SimSetup. caused a miscalculation of nLocal.
fixed a bug in symplectic, where presure was only being calculated the first time through.
added pentane to the alkane model file
Added volume and enthalpy to status file
fixes for NPT and NVT
It works (kinda)...
Fixes for NPT / NVT
Moved expand neighborlist to init_FF.
fixes for NVT
fixes for nvt / npt
dt/2 fix in nvt
Fixes for affine transform
Changes to integrate the NVT and NPT ensembles
Fixes for NPT and NVT
fixed a sign error in the radial portion of SSD.
doing some testing in sticky through Symplectic.
Working on NVT
Fixed transpose bug in mpi reduce for tau and virial.
bug fixes
Many fixes to add extended system
Fixed a bug caused by my experimentation
Added ExtendedSystem infrastructure for NPT and NVT calculations
Added targetPressure to BASS
final mods to try a fortran compiler
Bug fixes for simulation module rewrites
bug fixes for compilation
bug fixes to fortran wrappers
Breaking c and fortran, c gets smarter, fortran gets dumber...
fixed a memory read bug in neighborlist
Changes for Extended System
Fixes for ExtendedSystem
Added the SGI award in 2003, also edited papers and presentations to separate the two.
Added extended system header
changes for extended system code
renamed nvt to extendedsystem
added some little fixes here and there.
fixed a possible call before initialize bug.
just little things like deleteing unused variables and such.
a few fixes to simError.h also some fixes to Molecule.hpp
a few fixes to simError.h
fixed some small things with simError.h
Starting work on NPT
Added NVT file (very broken for now)
Changed Readme, added some files
dipoles mostly work, but there is a memory leak somewhere.
Fixed a bug where MPI was not getting the proper atomIdents.
more bug fixes....
Fixed DumpWriter to be more robust to errors. also added a little namespace to InitFromFile to wrap it's helper functions in MPI
Fixed bug with pot_local not zeroed.
Fixes in MPI force calc and in Trappe_Ex parsing.
bug fix in DumpWriter.cpp
Bug fixes in read-write routines.
fixed a bug where the Excludes were not being created properly
mpi fixes and debugging mpi read write from file.
fixed long range interactions in Trappe
MPI buggy, fixed mpiRefresh issue.
fixed a bug where excludes were not being initialized
*** empty log message ***
Fixed a single processor segfault bug.
fixed the compile time bugs, Source builds and links
fixed a few more bugs.
added the Molecule.cpp file
fixed the makefile
fixing some compile time bugs
I have implemeted Molecules everywhere I could remember to. will now attempt to compile.
finished updating SimSetup to initialize and use the new MPI division of labour, and Molecule class
finished conversion of TraPPE_ExFF to use Molecule
LJ_FF has been converted to the new Molecule model. TraPPE_Ex is currently being updated. SimSetups routines are writtten, but not yet called.
fixes for local->global atom numbering in MPI
little bug fixes here and there.
Fixes to fileio for MPI
bug fixes many bug fixes
Making DumpWriter less dependent on sequence of atoms on the other processors. Node 0 now fires potatoes at other processors to get them to send french fries back.
the skeleton for making the molecules is in place. ForceField needs to be updated next.
fixed a couple of the "static" bugs in Atom and Exclude
still working on the SimSetup routine. also fixed some things in Exclude.hpp
Added Atom.cpp and Exclude.cpp
Fixes in Atom and Exclude list
Make Atom.cpp able to add and delete ranges of atoms
added an Exclude class with static arrays similar to the Atom class
I'm overhauling the molecule class to contain it's own bonds, bends, and torsions. may god have mercy on my soul.
Finished globalIndex.
MPI stuff for passing out molecules
working on load balancing
Fixes for Parallel thermalization
fixed an mpi include bug in THermo.cpp
Fixed bugs with calculation of potential energy and temperature.
*** empty log message ***
added dummy files to keep the build deirectories from being pruned.
moving tests to samples
moved tests to samples
Tests are becoming samples
Added makefiles in tests directories
electrostatic changes for dipole / RF separation
little bug fixes here and there
added an argon test simulation
*** empty log message ***
added some test bass files for experimenting with
fixed bug where short range interactions were not being calculated. removed some debug print statements
various write statements for debugging
added links to the makefile in forceFields
Fixed F_MACH_DEP bug
Makefile fixes, directory re-org, autoconf fixes
Added license file
Fixed makefile
Makefile for forceFields
Readme changes
*** empty log message ***
Makefile fixes for depends
This commit was generated by cvs2svn to compensate for changes in r377, which included commits to RCS files with non-trunk default branches.
Bug fixes in TraPPE. calc_LJ_FF.F90: Removed print lines. TraPPE_ExFF.cpp: Fixed so idents are being set.
more bug fixes...
*** empty log message ***
fixed a bug in the torsions.
Working on the Makefile
Fixed bugs in atype_module.F90 atype_module.F90:new_atype: status was reused for force field checks, created new variable FFcheckStatus to be result of FF checks.
*** empty log message ***
fixed some bugs. LJ argon works. Error calling new atype for SSD in TraPPE_Ex.
Fixed bugs. Single version now runs w/o segfault. Still a conservation of energy bug. do_Forces.F90: Fixed pot not being passed to do_pair. neighborLists.F90: Fixed bugs in checkNeighborLists atype_module.F90: Fixed bug with allocating atypes on each new_atype call.Now checks to see if atypes is null, then calles initialize(16). vector_class.F90: Fixed some bugs with how MatchList was being allocated.
*** empty log message ***
compiles and links. And promptly segfaults.
some initial bug fixes
added GB
last little changes before compiling and debuging
shed implementation of the Fortran interfaces.
getNlocal no longer in force_globals
brought force_globals back from the dead to fix circular references
adding more to the interface
bug fixes for new fForceField.h
working on the fortran init ForceField interface.
fortran-side fixes to play nice with C
*** empty log message ***
merged stable-0_5 into the main trunk
blah!
mostly compiles. interface twixt c and fortran is broken. (c needs to be brought up to date with fortran.)
Updated the Makefile to contain all of the new fortran
vector class tests correctly.
deprecated the ssd forcefield in C++
Bug fixes in vector_class.
fixed some bugs in BendStamp from when Ghost Bend was implemented.
last minute changes
Minor alterations to the layout
changed the font
spellchecked it.
A near final product
*** empty log message ***
Setting up my CV.
made som e revisions to the application.
fixes for the exclude lists
just working on some changes to the application.
initialization routines, bug fixes, exclude lists
Fixed some more compile bugs in do_Forces.F90.
forceGlobals is gone (part3)
Stick a fork in it. It's rare.
bye bye atypeGlobals (part2)
bye bye forceGlobals (part 1)
fixes for major rewrite
Massive rewrite
MPI bug fix
bunch of fixes
Massive sticky rewrite
added the force parameter files into the distribution
Fixed mixing list to work with new atypes using vector class.
rearranging source files
Added allocation of module arrays.
Bug fixes
Fixed bugs, added logical routines
Changes to vector_class and removed all traces of linked list.
Fixed a bug
Did a bunch of match/find routines
Bunch o' stuff, particularly the vector_class.F90 module
finished adding the ghostBend into the TraPPE_Ex force Field
Changed generic lists so they work correctly
Massive rewrite underway. This way be dragons.
Added ghostBend into SimSetup. only need to add awareness to TraPPE_Ex
Changed names of calculation modules for do_Forces.
More changes to code. Hopefully these will commit smoothly.
some cleanup
Removed extra copy of dipole dipole
added the ghost bend bend type.
Added stuff for Dipole/Dipole and ReactionField
GhostBend addition
added fortranWrappers and Forcefield.cpp to the makefile
implemented the new fortran force interface
More code clean-up.
Dan Goes Crazy
dded more static arrays to the Atom class;
Split force loop into subroutines. Moved wrap out of simulation module.
finished conversion of all function wrapping into fortranWrappers.cpp and .hpp respectively
cleaning up all of the function wrapping
Changed code to use one generic force loop. Only one super atype that has all information is now used.
overhauled TraPPE_Ex forcfield in C++
Made changes to lj_FF.cpp to pass stress tensor.
added randomSPRNG.hpp to the package (oops, should have beenthere to begin with.) added ssdFF++.cpp to the makefile
Changed lj_FF to use new neighbor list module.
fixed some changes to the Globals in libBASS Added some files to the Makefile and added ssdFF++.cpp to the C++ side of things
fixed some changes to the Globals in libBASS
OOPSE has been braought up to date with the mdtools devfelopment tree. mdtools should no longer be used. All development should take place in the OOPSE tree.
Added neighbor list module that auto expands...
Added simulation struct...
Changes...
Changes they are a comming....
added changelog and NEws info
incremented the version to 0.6
oose and oopse build and distribute!
oopse compiles and links!
oose builds and links oopse builds but can't find mpich++
libmdCode builds.
added mpi for libmdCode (still working out the kinks)
added some checks for libmpich and got single processor to build in libmdCode
dded some stuff
working on getting this distribution working
added libmdCode and a couple help scripts
libBASS and libmpiBASS are completely self encapsulated.
added mpiBASS.c and .h for the mpi libraries
Successfully added all the source for libBASS
Added SSD atypes.
Initial commit of ssd force module.
Fixed bug with pot energy.
Changed to single version. No change.
Changed to single version.
We have working code today... MPI bug fixes to DumpWriter.
Fixed some bugs, made some more.
MPI is Brooooooken...
*** empty log message ***
MPI is Broooooken. Saving poor state so I know where to begin with.
fixed a bug in the final eor file.
Changes in mpiBass.
Bug fixes for mpi version of code
Added a generic util code directory and moved Linux_ifc_machdep to it. MPI changes to compile MPI modules.
Force loops seems to work, velocitize never being called....
Add print lines to simBASS and fixed Makefile to link w/ icc.
More bug fixes... Forgot to build sprng
For some unknown reason the Single processor builds. Has not been tested!
final version before the single processor build
added generic atypes
lj_FF.F90 and simulation_module now compile. Logical bug still exists in lj_FF.F90 lj_atypes_list.
*** empty log message ***
added the fortran function wrapping to the mpiSim class
*** empty log message ***
added wrapping of fortran to a private function of SimInfo
modified the box vairable on setSimulation to be a length 3 array
Added init function to c++ force module.
More changes to lj_ff. Force loop almost ready.
*** empty log message ***
added some stuf to implement thefortran interface in LJ_FF
this completes the addition of fvortran function wrapping into the LJ_FF class.
*** empty log message ***
started some additions to wrap LJ down to fortran. INCOMPLETE!
tarted some additions to wrap LJ down to fortran. INCOMPLETE!
A few more changes to force loop.
starting down the crooked path of the fornographer.
More changes to lj_FF.
just some initial fiddling
removed a ps file that should not be backed up
This commit was generated by cvs2svn to compensate for changes in r226, which included commits to RCS files with non-trunk default branches.
fixed up LJ_FF
fixed up the LJ_FF implementation. It is now the standard for building a force routine.
Finished thermo and randomSPRNG classes.
More codeing on fortran force backend.
Thermo now can use SPRNG or rand48 (if not MPI). Finished up work on randomSPRNG. Still need to fix access to MPISimulation.
Added more code to randomSPRNG classes.
Added classes to handle random number generation.
Changed thermo getKinetic and getPotential for MPI. Added header for SPRNG random number generator class.
Added SPRNG header file.
*** empty log message ***
+ added lennard-jones force module and corresponding class. + created forceFactory directory.
*** empty log message ***
finishing work on making DumpWriter parrallel
Added mpi to InitializeFromFile read in.
Added replan of gather-scatter routines for future load balancing.
Finished updating mpiSimulation to work with c++.
*** empty log message ***
added the pareDumpLine routine to the Initialize from File class
Changed name of mpi_force_module to mpiSimulation to match with C++ code.
Initial mpi io conversion.
finished adding in the code to divide and set up the atoms and such across all of the processors.
fixed typo with #ifdef.
Added mpiComponentPlan.h a dual fortran c header file defining mpi simulation parameters for both c and fortran.
*** empty log message ***
made some shanges to streamline the setup in SimSetup
*** empty log message ***
cleaned up the divideLabour interface to use the information about Moleculestamps in the entryPlug.
*** empty log message ***
added the extraction routines so that the moleculeStamps corresponding to the actual components used in the simulation are now persistent throughout, and accessable through the SimInfo object.
Working on the clean removal of key Molecule stamps from the Hash table. stamps will be moved into a persitient linked list.
Added divideLabor.
First addition of mpiDivideLabor to split mpi simulation among processors.
*** empty log message ***
added files to divide the molecules among the processes.
Addition of c wrapper header for for fortran module proceedures.
some quick optimizations to the indexing in the storage arrays
*** empty log message ***
made some finishing changes before begining to work on the io
This will run the single processor version of libmdtools
if the libMPImdtools is working this should be the code to run it.
Initial commit of wrappers for fortran module proceedures.
*** empty log message ***
The simulation can run successfully on parrallel computers!! Now all that is need is the parrallel io routines, and parrallel forces
initial modifications
added simError.h to the makefile
This commit was generated by cvs2svn to compensate for changes in r179, which included commits to RCS files with non-trunk default branches.
*** empty log message ***
overhauled the makefiles to be more elegant with regard to builds.
ie. now the name of the library will change when you select single or mpi
build in the Makefile.inc compilers and flags will also be updated
*** empty log message ***
Fixed the whole lot to be simError safe, ands compiles. Not yet tested however
*** empty log message ***
*** empty log message ***
Bass shopuld be simError safe
the BASS event loop has finished converiosn to simError. However, it as yet untested.
continuing to refine the error checking in the BASS processing
MPI Force rewrite in progress...
Initial commit of mpi routines for force decomposition.
First commit of mpi force code.
*** empty log message ***
working on the conversion of the BASS inititialization to be parrallel safe
*** empty log message ***
adding simError into the mpiBASS Event loop
*** empty log message ***
finished updates on the easy simError change overs.
*** empty log message ***
still working on conversion over to simError
*** empty log message ***
adding in simError
*** empty log message ***
finished work on the error handling struct and functions
*** empty log message ***
started work on a global error handling scheme
*** empty log message ***
making further modifications to make FOrceField objects mpi aware
*** empty log message ***
more tinkering with the forcefield event loop
minor revisions
more minor changes to the mpi structs
finished adding in the extra structures needed to pass info through mpi. Still need to add the implementation.
finished adding the static storage arrays to the atom class
Changing internal storage of positions, torqes, forces, velocities, etc. not sure here, still working
Changing internal storage of positions, torqes, forces, velocities, etc.
*** empty log message ***
adding ForceField mpi awareness adding mpi FOrceField awareness
adding ForceField mpi awareness
*** empty log message ***
changed mpiInterface.c and .h -> mpiBASS.c and .h for clarity of purpose
*** empty log message ***
Added lhs of assignments..
Fixed double inclusion of mpiBASSEventType with define in header file.
*** empty log message ***
Clean up with icc debug flags...
*** empty log message ***
*** empty log message ***
Include makefile
quick bug fix to bassDiag
*** empty log message ***
added stamp and template diagnostic features
Added make include.
*** empty log message ***
*** empty log message ***
changed dirs...
*** empty log message ***
Initial mpi support
Addition of mpiInterface to code base.
First stab at passing base events to mpi....
begin the pain that is MPI. abandon all hope ye who check out this branch.. P.S. we've added consistent BASS error checking
fixed allot of warnings, and adde the molecule
starting work on the molecule class starting to add in the molecule class adding in the molecule class
starting work on the molecule class starting to add in the molecule class
starting work on the molecule class
the final copy went out this morning. YAYYYYYYYYY!!!!!!!!!!!!!!!
made some final revisions, and started to add some figures
added a bunch of igures
text is finished YAY!!!
finished the revisions of the first draft now only lacks a complete results section, and a future Directions section
revisions to the first draft halfway complete. completed the introduction.
added command line arguments, and a time smoother
fixed a little seen output bug. (Tarega is not always default)
fixed a cosCorr and GofR flag bug, as well as the GofR scaling bug.
running into some problemsd with the figures.
made some changes to the Makefile, and added the sections I think I should write
did a little more typing
additions to the lipid model
got the water SSD model section "done"
added the ssd figure
added some equations and other misc stuff. needs lots of work.
just writing, not much editing yet
This commit was generated by cvs2svn to compensate for changes in r93, which included commits to RCS files with non-trunk default branches.
*** empty log message ***
*** empty log message ***
*** empty log message ***
*** empty log message ***
*** empty log message ***
VS: ---------------------------------------------------------------------- added more figures, and fixed the slides. GFave a practice talk 6-16-02 with this.
*** empty log message ***
fixed somebugs with start frame
added a utility to output what time of each frame
*** empty log message ***
added the capability to specify a start and end frame for cosCorr and GofR
*** empty log message ***
spell checked
I think I have most of it the way I like it, just need to change the correlation functions, and the final pictures
fixed some figures almost done with slides
*** empty log message ***
added figures fixed more of the graphs
*** empty log message ***
*** empty log message ***
*** empty log message ***
*** empty log message ***
*** empty log message ***
*** empty log message ***
changed some of the figures, and put some more polish on the intro
*** empty log message ***
*** empty log message ***
flexible atom selection
made a new figure. trying to add it to the slide
fixed the citations. continueing to clean up the slides.
switched in Chuck's magic slide enviroment
added a crapload of crap that may or may norbe neccassary. Time will tell. Also, got footnote references working.
This commit was generated by cvs2svn to compensate for changes in r60, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r58, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r56, which included commits to RCS files with non-trunk default branches.
fixed the Makefile
added all of the pictures. And gave a practice talk based on this version. Now begins the process of cleanup and additions of citations.
getting there. Most everything but the motivation slide has been filled out. Lacks only pictures and Diagrams.
Skeletons of most every slide
made some changes
This commit was generated by cvs2svn to compensate for changes in r49, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r47, which included commits to RCS files with non-trunk default branches.
added the cos correlation function
got the GofR code working, and slimmed down the memory usage.
finished working on the command line options, and started working on the GofR added the GofR header, and moved the strructure definitions to the madProps.h
finished working on the command line options, and started working on the GofR
made a header directory, and fixed the Makefile to work with it the new header dir
made a header directory, and fixed the Makefile to work with it
took out a reference file
This commit was generated by cvs2svn to compensate for changes in r38, which included commits to RCS files with non-trunk default branches.
fixed the ordering on the end of file test
moved the actual routine into a seperate source from the main. This allows the routine to be used in other applications.
This commit was generated by cvs2svn to compensate for changes in r34, which included commits to RCS files with non-trunk default branches.
cleaned up the output a little
fixed makeRandom to set up a correct simulation
fixed a bug in getA( double the_A[3][3] );
added the getA( double the_A[3][3] ) routine to the Directional Atom Class, to facilitate easier RotMat aquisition
adding the routines to the proogram `
adding a program to make a lipid configuration with random dispersion of lipids.
fixed some bugs in the Makefile
removed xLate.cpp which was part of a seperate project
fixed a precision error in the calculation of the temperature. Also fixed the order that dump file are written.
removed a misc file
This commit was generated by cvs2svn to compensate for changes in r22, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r20, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r18, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r16, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r14, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r12, which included commits to RCS files with non-trunk default branches.
This commit was generated by cvs2svn to compensate for changes in r10, which included commits to RCS files with non-trunk default branches.
nose hoover chains added
*** empty log message ***
*** empty log message ***
*** empty log message ***
*** empty log message ***
Import Root
initial checkin
initial checkin
Standard project directories initialized by cvs2svn.