src/constraints/Rattle.cpp

/*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Acknowledgement of the program authors must be made in any
 *    publication of scientific results based in part on use of the
 *    program.  An acceptable form of acknowledgement is citation of
 *    the article in which the program was described (Matthew
 *    A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
 *    J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
 *    Parallel Simulation Engine for Molecular Dynamics,"
 *    J. Comput. Chem. 26, pp. 252-271 (2005))
 *
 * 2. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 3. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 */
 
#include "constraints/Rattle.hpp"
#include "primitives/Molecule.hpp"
#include "utils/simError.h"
namespace oopse {

  Rattle::Rattle(SimInfo* info) : info_(info), maxConsIteration_(10), consTolerance_(1.0e-6) {
    
    if (info_->getSimParams()->haveDt()) {
      dt_ = info_->getSimParams()->getDt();
    } else {
      sprintf(painCave.errMsg,
              "Integrator Error: dt is not set\n");
      painCave.isFatal = 1;
      simError();
    }    
    
    currentSnapshot_ = info_->getSnapshotManager()->getCurrentSnapshot();
  }

  void Rattle::constraintA() {
    if (info_->getNConstraints() > 0) {
      doConstraint(&Rattle::constraintPairA);
    }
  }
  void Rattle::constraintB() {
    if (info_->getNConstraints() > 0) {
      doConstraint(&Rattle::constraintPairB);
    }
  }

  void Rattle::doConstraint(ConstraintPairFuncPtr func) {
    Molecule* mol;
    SimInfo::MoleculeIterator mi;
    ConstraintElem* consElem;
    Molecule::ConstraintElemIterator cei;
    ConstraintPair* consPair;
    Molecule::ConstraintPairIterator cpi;
    
    for (mol = info_->beginMolecule(mi); mol != NULL; mol = info_->nextMolecule(mi)) {
      for (consElem = mol->beginConstraintElem(cei); consElem != NULL; consElem = mol->nextConstraintElem(cei)) {
        consElem->setMoved(true);
        consElem->setMoving(false);
      }
    }
    
    //main loop of constraint algorithm
    bool done = false;
    int iteration = 0;
    while(!done && iteration < maxConsIteration_){
      done = true;

      //loop over every constraint pair

      for (mol = info_->beginMolecule(mi); mol != NULL; mol = info_->nextMolecule(mi)) {
        for (consPair = mol->beginConstraintPair(cpi); consPair != NULL; consPair = mol->nextConstraintPair(cpi)) {


          //dispatch constraint algorithm
          if(consPair->isMoved()) {
            int exeStatus = (this->*func)(consPair);

            switch(exeStatus){
            case consFail:
              sprintf(painCave.errMsg,
                      "Constraint failure in Rattle::constrainA, Constraint Fail\n");
              painCave.isFatal = 1;
              simError();                             
                            
              break;
            case consSuccess:
              //constrain the pair by moving two elements
              done = false;
              consPair->getConsElem1()->setMoving(true);
              consPair->getConsElem2()->setMoving(true);
              break;
            case consAlready:
              //current pair is already constrained, do not need to move the elements
              break;
            default:          
              sprintf(painCave.errMsg, "ConstraintAlgorithm::doConstrain() Error: unrecognized status");
              painCave.isFatal = 1;
              simError();                           
              break;
            }      
          }
        }
      }//end for(iter->first())


      for (mol = info_->beginMolecule(mi); mol != NULL; mol = info_->nextMolecule(mi)) {
        for (consElem = mol->beginConstraintElem(cei); consElem != NULL; consElem = mol->nextConstraintElem(cei)) {
          consElem->setMoved(consElem->getMoving());
          consElem->setMoving(false);
        }
      }

      iteration++;
    }//end while

    if (!done){
      sprintf(painCave.errMsg,
              "Constraint failure in Rattle::constrainA, too many iterations: %d\n",
              iteration);
      painCave.isFatal = 1;
      simError();    
    }
  }

  int Rattle::constraintPairA(ConstraintPair* consPair){
    ConstraintElem* consElem1 = consPair->getConsElem1();
    ConstraintElem* consElem2 = consPair->getConsElem2();

    Vector3d posA = consElem1->getPos();
    Vector3d posB = consElem2->getPos();

    Vector3d pab = posA -posB;   

    //periodic boundary condition

    currentSnapshot_->wrapVector(pab);

    RealType pabsq = pab.lengthSquare();

    RealType rabsq = consPair->getConsDistSquare();
    RealType diffsq = rabsq - pabsq;

    // the original rattle code from alan tidesley
    if (fabs(diffsq) > (consTolerance_ * rabsq * 2)){
    
      Vector3d oldPosA = consElem1->getPrevPos();
      Vector3d oldPosB = consElem2->getPrevPos();      

      Vector3d rab = oldPosA - oldPosB;    

      currentSnapshot_->wrapVector(rab);

      RealType rpab = dot(rab, pab);
      RealType rpabsq = rpab * rpab;

      if (rpabsq < (rabsq * -diffsq)){
        return consFail;
      }

      RealType rma = 1.0 / consElem1->getMass();
      RealType rmb = 1.0 / consElem2->getMass();

      RealType gab = diffsq / (2.0 * (rma + rmb) * rpab);

      Vector3d delta = rab * gab;

      //set atom1's position
      posA += rma * delta;    
      consElem1->setPos(posA);

      //set atom2's position
      posB -= rmb * delta;
      consElem2->setPos(posB);

      delta /= dt_;
    
      //set atom1's velocity
      Vector3d velA = consElem1->getVel();
      velA += rma * delta;
      consElem1->setVel(velA);

      //set atom2's velocity
      Vector3d velB = consElem2->getVel();
      velB -= rmb * delta;
      consElem2->setVel(velB);

      return consSuccess;
    }
    else
      return consAlready;
  
  }


  int Rattle::constraintPairB(ConstraintPair* consPair){
    ConstraintElem* consElem1 = consPair->getConsElem1();
    ConstraintElem* consElem2 = consPair->getConsElem2();

  
    Vector3d velA = consElem1->getVel();
    Vector3d velB = consElem2->getVel();

    Vector3d dv = velA - velB;

    Vector3d posA = consElem1->getPos();
    Vector3d posB = consElem2->getPos();

    Vector3d rab = posA - posB;

    currentSnapshot_->wrapVector(rab);

    RealType rma = 1.0 / consElem1->getMass();
    RealType rmb = 1.0 / consElem2->getMass();

    RealType rvab = dot(rab, dv);

    RealType gab = -rvab / ((rma + rmb) * consPair->getConsDistSquare());

    if (fabs(gab) > consTolerance_){
      Vector3d delta = rab * gab;
      
      velA += rma * delta;
      consElem1->setVel(velA);
      
      velB -= rmb * delta;
      consElem2->setVel(velB);

      return consSuccess;
    }
    else
      return consAlready;

  }

}
Revision:	2759
Committed:	Wed May 17 21:51:42 2006 UTC (19 years, 5 months ago) by tim
File size:	7920 byte(s)
Log Message:	Adding single precision capabilities to c++ side
#	Content
1	/*
2	* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3	*
4	* The University of Notre Dame grants you ("Licensee") a
5	* non-exclusive, royalty free, license to use, modify and
6	* redistribute this software in source and binary code form, provided
7	* that the following conditions are met:
8	*
9	* 1. Acknowledgement of the program authors must be made in any
10	* publication of scientific results based in part on use of the
11	* program. An acceptable form of acknowledgement is citation of
12	* the article in which the program was described (Matthew
13	* A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
14	* J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
15	* Parallel Simulation Engine for Molecular Dynamics,"
16	* J. Comput. Chem. 26, pp. 252-271 (2005))
17	*
18	* 2. Redistributions of source code must retain the above copyright
19	* notice, this list of conditions and the following disclaimer.
20	*
21	* 3. Redistributions in binary form must reproduce the above copyright
22	* notice, this list of conditions and the following disclaimer in the
23	* documentation and/or other materials provided with the
24	* distribution.
25	*
26	* This software is provided "AS IS," without a warranty of any
27	* kind. All express or implied conditions, representations and
28	* warranties, including any implied warranty of merchantability,
29	* fitness for a particular purpose or non-infringement, are hereby
30	* excluded. The University of Notre Dame and its licensors shall not
31	* be liable for any damages suffered by licensee as a result of
32	* using, modifying or distributing the software or its
33	* derivatives. In no event will the University of Notre Dame or its
34	* licensors be liable for any lost revenue, profit or data, or for
35	* direct, indirect, special, consequential, incidental or punitive
36	* damages, however caused and regardless of the theory of liability,
37	* arising out of the use of or inability to use software, even if the
38	* University of Notre Dame has been advised of the possibility of
39	* such damages.
40	*/
41
42	#include "constraints/Rattle.hpp"
43	#include "primitives/Molecule.hpp"
44	#include "utils/simError.h"
45	namespace oopse {
46
47	Rattle::Rattle(SimInfo* info) : info_(info), maxConsIteration_(10), consTolerance_(1.0e-6) {
48
49	if (info_->getSimParams()->haveDt()) {
50	dt_ = info_->getSimParams()->getDt();
51	} else {
52	sprintf(painCave.errMsg,
53	"Integrator Error: dt is not set\n");
54	painCave.isFatal = 1;
55	simError();
56	}
57
58	currentSnapshot_ = info_->getSnapshotManager()->getCurrentSnapshot();
59	}
60
61	void Rattle::constraintA() {
62	if (info_->getNConstraints() > 0) {
63	doConstraint(&Rattle::constraintPairA);
64	}
65	}
66	void Rattle::constraintB() {
67	if (info_->getNConstraints() > 0) {
68	doConstraint(&Rattle::constraintPairB);
69	}
70	}
71
72	void Rattle::doConstraint(ConstraintPairFuncPtr func) {
73	Molecule* mol;
74	SimInfo::MoleculeIterator mi;
75	ConstraintElem* consElem;
76	Molecule::ConstraintElemIterator cei;
77	ConstraintPair* consPair;
78	Molecule::ConstraintPairIterator cpi;
79
80	for (mol = info_->beginMolecule(mi); mol != NULL; mol = info_->nextMolecule(mi)) {
81	for (consElem = mol->beginConstraintElem(cei); consElem != NULL; consElem = mol->nextConstraintElem(cei)) {
82	consElem->setMoved(true);
83	consElem->setMoving(false);
84	}
85	}
86
87	//main loop of constraint algorithm
88	bool done = false;
89	int iteration = 0;
90	while(!done && iteration < maxConsIteration_){
91	done = true;
92
93	//loop over every constraint pair
94
95	for (mol = info_->beginMolecule(mi); mol != NULL; mol = info_->nextMolecule(mi)) {
96	for (consPair = mol->beginConstraintPair(cpi); consPair != NULL; consPair = mol->nextConstraintPair(cpi)) {
97
98
99	//dispatch constraint algorithm
100	if(consPair->isMoved()) {
101	int exeStatus = (this->*func)(consPair);
102
103	switch(exeStatus){
104	case consFail:
105	sprintf(painCave.errMsg,
106	"Constraint failure in Rattle::constrainA, Constraint Fail\n");
107	painCave.isFatal = 1;
108	simError();
109
110	break;
111	case consSuccess:
112	//constrain the pair by moving two elements
113	done = false;
114	consPair->getConsElem1()->setMoving(true);
115	consPair->getConsElem2()->setMoving(true);
116	break;
117	case consAlready:
118	//current pair is already constrained, do not need to move the elements
119	break;
120	default:
121	sprintf(painCave.errMsg, "ConstraintAlgorithm::doConstrain() Error: unrecognized status");
122	painCave.isFatal = 1;
123	simError();
124	break;
125	}
126	}
127	}
128	}//end for(iter->first())
129
130
131	for (mol = info_->beginMolecule(mi); mol != NULL; mol = info_->nextMolecule(mi)) {
132	for (consElem = mol->beginConstraintElem(cei); consElem != NULL; consElem = mol->nextConstraintElem(cei)) {
133	consElem->setMoved(consElem->getMoving());
134	consElem->setMoving(false);
135	}
136	}
137
138	iteration++;
139	}//end while
140
141	if (!done){
142	sprintf(painCave.errMsg,
143	"Constraint failure in Rattle::constrainA, too many iterations: %d\n",
144	iteration);
145	painCave.isFatal = 1;
146	simError();
147	}
148	}
149
150	int Rattle::constraintPairA(ConstraintPair* consPair){
151	ConstraintElem* consElem1 = consPair->getConsElem1();
152	ConstraintElem* consElem2 = consPair->getConsElem2();
153
154	Vector3d posA = consElem1->getPos();
155	Vector3d posB = consElem2->getPos();
156
157	Vector3d pab = posA -posB;
158
159	//periodic boundary condition
160
161	currentSnapshot_->wrapVector(pab);
162
163	RealType pabsq = pab.lengthSquare();
164
165	RealType rabsq = consPair->getConsDistSquare();
166	RealType diffsq = rabsq - pabsq;
167
168	// the original rattle code from alan tidesley
169	if (fabs(diffsq) > (consTolerance_ * rabsq * 2)){
170
171	Vector3d oldPosA = consElem1->getPrevPos();
172	Vector3d oldPosB = consElem2->getPrevPos();
173
174	Vector3d rab = oldPosA - oldPosB;
175
176	currentSnapshot_->wrapVector(rab);
177
178	RealType rpab = dot(rab, pab);
179	RealType rpabsq = rpab * rpab;
180
181	if (rpabsq < (rabsq * -diffsq)){
182	return consFail;
183	}
184
185	RealType rma = 1.0 / consElem1->getMass();
186	RealType rmb = 1.0 / consElem2->getMass();
187
188	RealType gab = diffsq / (2.0 * (rma + rmb) * rpab);
189
190	Vector3d delta = rab * gab;
191
192	//set atom1's position
193	posA += rma * delta;
194	consElem1->setPos(posA);
195
196	//set atom2's position
197	posB -= rmb * delta;
198	consElem2->setPos(posB);
199
200	delta /= dt_;
201
202	//set atom1's velocity
203	Vector3d velA = consElem1->getVel();
204	velA += rma * delta;
205	consElem1->setVel(velA);
206
207	//set atom2's velocity
208	Vector3d velB = consElem2->getVel();
209	velB -= rmb * delta;
210	consElem2->setVel(velB);
211
212	return consSuccess;
213	}
214	else
215	return consAlready;
216
217	}
218
219
220	int Rattle::constraintPairB(ConstraintPair* consPair){
221	ConstraintElem* consElem1 = consPair->getConsElem1();
222	ConstraintElem* consElem2 = consPair->getConsElem2();
223
224
225	Vector3d velA = consElem1->getVel();
226	Vector3d velB = consElem2->getVel();
227
228	Vector3d dv = velA - velB;
229
230	Vector3d posA = consElem1->getPos();
231	Vector3d posB = consElem2->getPos();
232
233	Vector3d rab = posA - posB;
234
235	currentSnapshot_->wrapVector(rab);
236
237	RealType rma = 1.0 / consElem1->getMass();
238	RealType rmb = 1.0 / consElem2->getMass();
239
240	RealType rvab = dot(rab, dv);
241
242	RealType gab = -rvab / ((rma + rmb) * consPair->getConsDistSquare());
243
244	if (fabs(gab) > consTolerance_){
245	Vector3d delta = rab * gab;
246
247	velA += rma * delta;
248	consElem1->setVel(velA);
249
250	velB -= rmb * delta;
251	consElem2->setVel(velB);
252
253	return consSuccess;
254	}
255	else
256	return consAlready;
257
258	}
259
260	}